Flex L 12-3 100 WET Instruction Manual page 14

Instruction manual
TO START AND STOP THE
TOOL
DANGER
Any further use or operation is not
permitted under such circumstances!
Brief operation without engaged
switch rocker:
13
1. Push the switch rocker forwards and
hold in position.
2. To switch off the power tool, release
the switch rocker.
Continuous operation with engaged
switch rocker:
14
1. Push the switch rocker forwards (1.)
and engage by pressing the front
end (2.).
14
15
2. To switch off the power tool, release
the switch rocker by pressing the
rear end.
! NOTE
Following a power failure, the switched
on power tool does not restart.
USING THE POWER TOOL
DANGER
9 16
When using the tool for a horizontal
application, work the tool as shown
in Fig. 16.
L/LE 12-3 100 WET
!