Supervisor/User Password - QDI P6I440EX/MATX EXCELLENT II Manual

AWARD BIOS Description
Current System Temp.
Current CPUFAN Speed
Current CHSFAN Speed
Current PSFAN Speed
VCCVID(CPU) Voltage
VTT (+1.5) Voltage
+3.3V Voltage
+5V Voltage
+12V Voltage
-12V Voltage
-5V Voltage
The following indicates the options of each item and describes their meaning.
Item
• Current CPU Temp.
• Current System Temp.
• Current CPUFAN Speed
Current CHSFAN Speed
Current PSFAN Speed
• VCCVID(CPU) Voltage,
VTT (+1.5) Voltage,
+ 3.3V,
+ 5V,
+12 V,
- 12 V,
- 5 V.

Supervisor/User Password

If this function is selected, the following message will appear at the center of the
screen to assist you in creating a password.
Type the password, up to eight characters, and press <Enter>. The password typed
now will clear any previously entered password from CMOS memory. You will be
asked to confirm the password. Type the password again and press <Enter>. You
may also press <Esc> to abort the selection.
3 - 14
: 35°C/95°F
: 4320 RPM
: 2010 RPM
: 2150 RPM
: 2.81V
: 1.50V
: 3.32V
: 4.97V
: 11.97V
: -12.03V
: -4.85V
Figure-9 System Monitor Setup Menu
Option
The temperature near the CPU.
The temperature inside the chassis.
RPM (Revolution Per Minute) Speed of fan which
is connected to the fan header CPUFAN, PSFAN
or CHSFAN. Fan speed value is based on an
assumption that tachometer signal is two pulses per
revolution; In other cases, you should regard it
relatively.
Displays current Voltage value including all the
most important voltages of the mainboard. +3.3V,
+5V, +12V, -12V, -5V are voltages from the ATX
power supply, VTT (+1.5) Voltage is GTL
Termination Voltage from the on board regulator,
and VCCVID (CPU) Voltage is the CPU Core
Voltage from the on board switching Power
Supply.
ENTER PASSWORD
↑↓→← : Select Item
ESC: QUIT
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2: Color
F7 : Load Setup Defaults
Description