Table of Contents
Advertisement
Virus Warning
Pentium(R)II L1 Cache
Pentium(R)II L2 Cache
Quick Power On Self Test
Boot From LAN First
Boot Sequence
Swap Floppy Drive
Boot Up Floppy Seek
Hard Disk Write Protect
Drive A Boot Permit
Floppy Disk Access Control
Boot Up Numlock Status
Gate A20 Option
Typematic Rate Setting
Typematic Rate (Chars/Sec)
Typematic Delay(Msec)
Security Option
PS/2 mouse function control
OS Select For DRAM>64MB
Report No FDD For WIN 95
The following indicates the options of each item and describes their meaning.
Item
• Virus Warning
Enabled
Disabled
• Pentium(R)II
Enabled
Disabled
L1/L2 Cache
• Quick Power
Enabled
On Self Test
Disabled
• Boot From LAN
Enabled
First
Disabled
• Boot Sequence
A,C,SCSI, ...
C, CDROM,A
• Swap Floppy
Enabled
Drive
Disabled
• Boot Up Floppy
Enabled
Seek
Disabled
: Disabled
: Enabled
: Enabled
: Enabled
: Disabled
: C,A, SCSI
: Disabled
: Disabled
: Disabled
: Enabled
: R/W
: On
: Fast
: Disabled
: 6
: 250
: Setup
: Enabled
: Non-OS2
: Yes
Figure-4 BIOS Features Setup Menu
Option
Activated automatically when the system boots up,
causing a warning message to appear when anything
attempts to access the boot sector or hard disk partition
table.
No warning message appears when anything attempts
to access the boot sector or hard disk partition table.
Note: This function is available only for DOS and
other OS that does not trap INT13.
Enables Pentium
Disables Pentium
Enables quick POST. BIOS will shorten or skip some
items normally checked during POST to speed up
POST after you power on the computer.
Normal POST.
Boot from LAN is ahead of any boot sequence
selection (LAN Adapter must support this function).
Does not boot from LAN first.
Any search sequence can be chosen for booting.
Exchanges the assignment of A&B floppy drives.
The assignment of A&B floppy drives are normal.
BIOS searches for the floppy disk drive to determine if
the drive is ready for diskette read/write during
booting.
Skips the drive seeking to speed up system booting.
Video BIOS Shadow
C8000 ~ CBFFF Shadow : Disabled
CC000 ~ CFFFF Shadow : Disabled
D0000 ~ D3FFF Shadow : Disabled
D4000 ~ D7FFF Shadow : Disabled
D8000 ~ DBFFF Shadow : Disabled
DC000 ~ DFFFF Shadow : Disabled
Delay For HDD (Secs)
Show Boot up Logo
↑↓→← : Select Item
ESC: Quit
F1 : Help
PU/PD/+/- : Modify
F5 : Old Values (Shift)F2: Color
F7 : Load Setup Defaults
Description
®
II internal Level1/Level2 cache.
®
II internal Level1/Level2 cache.
Chapter 3
:
Enabled
: 0
: Enabled
3 -
5
Advertisement
Table of Contents
