Table of Contents
Advertisement
Onboard Parallel Port
The following indicates the options of each item and describes their meaning.
Item
• IDE HDD Block Mode
• IDE
Primary/Secondary
Master/Slave PIO
(UDMA)
• On-chip
Primary/Secondary
PCI IDE
• USB Keyboard
Support
• Onboard FDC
Controller
• Onboard Serial Port
1/2
• UART Mode Select
• Onboard Parallel Port
• Parallel Port Mode
System Monitor
Current CPU Temp.
: 378/IRQ7
Figure-8 Integrated Peripherals Menu
Option
Allows IDE HDD read/write several sectors at
Enabled
once.
IDE HDD only reads/writes a sector once.
Disabled
Defines the IDE primary/secondary master /
Mode 0 - 4
slave PIO mode.
The IDE PIO mode is defined according to
Auto
auto - detect.
On-chip primary/secondary PCI IDE port is
Enabled
enabled.
On-chip primary/secondary PCI IDE port is
Disabled
disabled.
USB Keyboard Support is Enabled.
Enabled
USB Keyboard Support is Disabled.
Disabled
Enabled
Onboard floppy disk controller is enabled.
Onboard floppy disk controller is disabled.
Disabled
Defines the onboard serial port address and
3F8/IRQ4,
required interrupt number.
2F8/IRQ3,
3E8/IRQ4,
2E8/IRQ3,
Onboard serial port is disabled.
Disabled,
Sets the address and interrupt number
Auto
automatically.
Defines UART2 as the standard serial port.
Normal
Supports SHARP ASK-IR protocol with
ASKIR
maximum band rate up to 57600bps.
Supports IrDA version 1.0 SIR protocol with
IrDA
maximum band rate up to 115.2 kbps.
The system function is the same as in Sharp-IR
IrDA SIR
mode, but at 115.2K Baud.
378/IRQ7,
Defines onboard parallel port address and IRQ
channel.
278/IRQ5,
Defines the parallel port mode as
SPP
Standard Parallel Port (SPP), Enhanced
EPP
Parallel Port (EPP), or Extended
ECP,
Capabilities Port (ECP).
ECP+EPP
ROM PCI/ISA BIOS (2A69JQ1K)
SYSTEM MONITOR
AWARD SOFTWARE , INC.
: 35°C/95°F
F5 : Old Values (Shift) F2 : Color
F7 : Load Setup Default
Description
Chapter 3
3 -
13
Advertisement
Table of Contents
