Table of Contents
Advertisement
AWARD BIOS Description
• + 3.3V,
VTT (+1.5)
Voltage,
+ 5V,
VCCVID (CPU) Voltage,
+12 V,
- 12 V,
- 5 V.
• Chassis Status
Supervisor/User Password
When you select this function, the following message will appear at the center
of the screen to assist you in creating a password.
ENTER PASSWORD
Type the password, up to eight characters, and press <Enter>. The password
typed now will clear any previously entered password from CMOS memory.
You will be asked to confirm the password. Type the password again and
press <Enter>. You may also press <Esc> to abort the selection and not enter
a password.
To disable password, just press <Enter> when you are prompted to enter
password. A message will confirm the password being disabled. Once the
password is disabled, the system will boot and you can enter Setup freely.
PASSWORD DISABLED
If you select "System" at "Security Option" of "BIOS Features Setup" Menu,
you will be prompted for the password every time the system is rebooted or
any time you try to enter "CMOS Setup".
If you select "Setup" at "Security Option" of "BIOS Features Setup" Menu, you
will be prompted for the password only when you try to enter "CMOS Setup".
Supervisor Password has higher priority than User Password. You can use
Supervisor Password when booting system or entering "CMOS Setup" to modify
all settings. Also you can use User Password when booting system or entering
"CMOS Setup" but can not modify any setting if Supervisor Password is enabled.
3- 18
signal is two pulses per revolution; In other
cases, you should regard it relatively.
Display current Voltage value including all the
most important voltages of the motherboard.
+3.3V, +5V, +12V, -12V, -5V are voltages from
the ATX power supply, VTT (+1.5) Voltage is
GTL Termination Voltage from the on board
regulator, and VCCVID (CPU) Voltage is CPU
Core Voltage from the on board switching
Power Supply.
Closed
The chassis is closed currently.
The chassis is opened currently.
Opened
Advertisement
Table of Contents
