System Monitor - QDI P6I440LX/L6 Manual

• Onboard Parallel Port
• Parallel Port Mode

System Monitor

Current CPU Temp.
Current System Temp.
Current CPUFAN Speed
Current CHSFAN Speed
VCCVID(CPU) Voltage
VTT (+1.5) Voltage
+3.3V Voltage
+5V Voltage
+12V Voltage
-12V Voltage
-5V Voltage
The following indicates the options of each item and describes their
meaning.
Item
• Current CPU Temp.
• Current System Temp.
• Current CPUFAN Speed
Current CHSFAN Speed
• VCCVID(CPU) Voltage,
VTT (+1.5) Voltage,
+ 3.3V,
+ 5V,
+12 V,
IrDA
378/IRQ7,
278/IRQ5,
SPP
EPP
ECP,
ECP+EPP
ROM PCI/ISA BIOS (2A69JQ1j)
SYSTEM MONITOR
AWARD SOFTWARE , INC.
: 35°C/95°F
: 35°C/95°F
: 0 RPM
: 0 RPM
: 2.81V
: 1.50V
: 3.32V
: 4.97V
: 11.97V
: -12.03V
: -4.85V
Figure-9 System Monitor Setup Menu
Option
The temperature near the CPU.
The temperature inside the chassis.
RPM (Revolution Per Minute) Speed of fan which
is connected to the fan header CPUFAN or
CHSFAN. Fan speed value is based on an
assumption that tachometer signal is two pulses per
revolution; In other cases, you should regard it
relatively.
Displays current Voltage value including all the
most important voltages of the motherboard.
+3.3V, +5V, +12V, -12V, -5V are voltages from
the ATX power supply, VTT (+1.5) Voltage is
GTL Termination Voltage from the on board
maximum band rate up to 57600bps.
Supports IrDA version 1.0 SIR protocol with
maximum band rate up to 115.2 kbps.
Defines onboard parallel port address and IRQ
channel.
Defines the parallel port mode as
Standard Parallel Port (SPP), Enhanced
Parallel Port (EPP), or Extended
Capabilities Port (ECP).
↑↓→← : Select Item
ESC: QUIT
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2: Color
F7 : Load Setup Defaults
Description
Chapter 3
3 -
15