Advertisement
If a non-flashing 'Regeneration Icon' appears on the LCD Display
(figure 1) when 'Automatic Regeneration' is switched on, then
this only means that 'Automatic Regeneration' is being
performed.
This Icon will disappear after the 'Automatic Regeneration' has
completed. No further action is required.
If when 'Automatic Regeneration' is switched off a flashing
'Regeneration Icon' appears alongside icon the 'Regeneration Off'
icon (figure 2), then this indicates that a 'Parked Regeneration' is
immediately required.
This is the standard (Default) LCD Screen Display.
Note: In this case the Soot levels are only 18% which is not
high enough to require the DPF to need cleaning and
therefore no Icon is displayed.
If 'Automatic Regeneration' is switched off, then this Icon is
displayed on the LCD Screen.
If during any 'Regeneration' process (automatic or parked) a
'Thermometer Icon' should appear on the LCD display (figure 3)
then this is to warn the operator that very hot components or
exhaust gases currently exist.
Advertisement
