Cleaning And Storing The Secuquick Softline; Assembling The Secuquick Softline; Checking Valves And Seals - AMC Secuquick softline User Manual

4.2.

Cleaning and storing the Secuquick softline

Clean parts in the dishwasher or clean them thoroughly by hand with a soft sponge and neutral deter-
gent. Rinse with hot water, dry well.
Depending on the food being prepared, the sealing ring can absorb odors. This is entirely nat-
ural. Store the sealing ring away from light and only loosely attached to the Secuquick softline.
Insert the sealing ring correctly again only before you next use it.
4.3.

Assembling the Secuquick softline

Carry out the described inspection work during assembly. This inspection is important for safe and
correct operation.

Checking valves and seals

Check operating pressure valve:
ƒ Must be easy to press in approx. 3-4 mm with finger.
ƒ Must spring back easily, with no sticking.
If the operating pressure valve does not function prop-
erly, the Secuquick softline must no longer be used.
Contact AMC customer service.
Check operating pressure valve:
ƒ The openings in the rubber section must be clean.
ƒ Metal pin must be present.
Check safety valve 2:
ƒ The O-ring must not be damaged.
ƒ The O-ring must lie in the groove (at the bottom).
ƒ The steel ball must not be stuck. Check by pressing
it with a finger whether it can move freely and springs
back.
35