Print - Launch Creader 629 User Manual

LAUNCH

6. Print

This function is used to print the records saved on the Read Codes or Data
Stream screen.
Note: Print manager is integrated in the update tool. To perform this function,
you need to download the update tool and install it on the computer (For details,
refer to Chapter 8 Register & Upgrade).
1. Launch the update tool, a screen similar to Fig. 6-1 will appear:
2. Connect one end of the USB cable to your tool, and the other end on the
computer.
3. Generally the system automatically detects the Serial Number of the
scanner and the user does not need to enter it manually. Please wait for
about one minute until a screen similar to the following appears.
www.x431.com +86 755 8455 7891
Figure 6-1
Figure 6-2
629 User's Manual
35