Launch Creader 629 User Manual page 33

LAUNCH
Note: In case the diagnostic codes are manufacturer-specific, users need to
select the manufacturer manually and the following prompt message will pop up
on the screen.
Press [OK] to enter to select the manufacturer. Figure 5-5 will be shown on the
screen.
Press [ ] / [ ] to select different manufacturer; press the [ ] / [ ] button to turn
to next or previous page. After selecting the desired one, press [OK] to confirm.
• If some DTCs are found, the screen will display the DTCs (Refer to Figure 5-3).
• If the DTC can not be found, a screen similar to the following figure will appear:
28
Figure 5-4
Figure 5-5
www.x431.com +86 755 8455 7891
629 User's Manual