Settings - Launch Creader 629 User Manual

LAUNCH
LOOKUP
PRINT
HELP
SETUP

4.3 Settings

Select [Settings] on the main menu screen and press [OK], the system will
enter the following screen:
1) Language
This option enables you to set the user interface language.
2) Unit of Measure
This option allows you to set measurement unit.
3) Beeper
It is used to set On/Off the buzzer.
4) Record Mode
It is used to turn On/Off recording function.
24
Allows you retrieve the desired DTC and view its detailed
definition.
Prints the diagnostic records saved during diagnostic
session.
*Note: This function required a USB cable connection to PC.
Helps you have a general knowledge of the DLC location,
tool information and OBD etc.
Displays the tool setup menu, which lets you make
several adjustments and settings to configure the tool to
your particular needs.
Figure 4-4
www.x431.com +86 755 8455 7891
629 User's Manual