Page 1
UWLD & UTHS Installation Guide Utility Room Water Leak Detector and Temperature and Relative Humidity Sensor UWLDU-3 UTHSU This install guide covers the Echoflex Solutions Utility Room sensors, Water Leak Detector and the Room Temperature and Relative Humidity Sensor. Utility Room Temperature and RH sensor model: UTHS* Utility Room Temperature and Relative Humidity Sensor The Water Leak detector is available with sensing cable option lengths of 3,...
Page 2
The detector uses liquid sensing cable technology that can be installed in dark places, such as behind water heaters or dishwashers etc. The cable comes in 3 different lengths to suit the application.
Page 3
Linking the utility sensor to a receiver The linking process requires the controller or receiver to be mounted, powered and within range of the sensor. 1. Activate LEARN or LINK mode at the receiver, if necessary refer to the manufacturers documentation. 2.
Page 4
Battery The utility sensors are powered by a CR2477 - 3V Lithium coin cell battery which is not user serviceable. The battery life expectancy is minimum 7 years. Equipment Profiles UTHS EEP: A5-04-01 Temperature and Humidity UWLD EEP: D2-14-53 Leak Detection FCC Part 15.231 - Remote Control Transmitters Devices equipped with 902 MHz radio: Contains FCC ID: SZV-TCM515U...
This manual is also suitable for:
Echoflex uwldu-6Echoflex uwldu-10Echoflex uwldy-3Echoflex uwldy-6Echoflex uwldy-10Echoflex uthsu...
Show all