Baker Hughes Masoneilan SVI FF Quick Start Manual page 10

The tag lists the following items:
† ID: Unique factory-set identifier for the
device.
† Factory Node Address: Lists the
factory-set field bus node address.
† Device Type: A four digit code.
† Communications: Lists the protocol in
use.
† Pneumatic Train: Single Acting or
Double Acting.
† Display: Indicates whether the LED
display and pushbuttons are installed.
The actual device ID in this case is constructed according to the following
formula:
† 004745 – which is the manufacturer identifier for Masoneilan
† 0008 – which is the device type for SVI FF positioner
† ______________ - 14 underscore characters
† XXXXXXXX – the eight number string for the device part number as shown in the
picture below (first two letters are ignored)
† From the Live List information presented in the DCS or in the Communication DTM
(Figure 2).
10 |
Figure 2 - Device ID: Live List
† Tag: User-defined. This can be
changed for the specific application.
† Device Manufacturer: The six digits
comprise the first part of the ID and
Tag. Used to identify the DD.
† Device and Minimum DD Revision:
Represents the original firmware
revision flashed during manufacture.
This DD may have been upgraded
since installation.
† Diagnostics: Lists the level of
diagnostics with which the device
was shipped. This may have been
upgraded since installation.
† Pneumatic Flow: Standard Flow or
High Flow.
† Housing: Aluminum only.
© 2021 Baker Hughes Company. All rights reserved.