Subscribe to Our Youtube Channel
Related Manuals for Baker Hughes Masoneilan 47 P Series
Summary of Contents for Baker Hughes Masoneilan 47 P Series
- Page 1 47xxP/E Electropneumatic Positioner Customs Union (CU TR) Instruction Manual (Rev.A) Baker Hughes Data Classification: Public...
- Page 2 INFORMATION ADDITION CUSTOMER/OPERATOR’S NORMAL OPERATION AND MAINTENANCE PROCEDURES. SINCE OPERATION AND MAINTENANCE PHILOSOPHIES VARY, BAKER HUGHES (AND ITS SUBSIDIARIES AND AFFILIATES) DOES NOT ATTEMPT TO DICTATE SPECIFIC PROCEDURES, BUT TO PROVIDE BASIC LIMITATIONS AND REQUIREMENTS CREATED BY THE TYPE OF EQUIPMENT PROVIDED.
-
Page 3: Table Of Contents
10. SAFE INSTALLATION ............................ 12 10.1. For Intrinsic Safety ....................... 12 10.2. For Flameproof .......................... 13 Appendix A : 47xxP/E Customs Union Information ..................14 © 2023 Baker Hughes Company. All rights reserved. Masoneilan 47xxP/E Positioner CU TR Instruction Manual | 3... -
Page 4: Warning
In the balanced state, when the pneumatic signal varies, the diaphragm assembly moves. This movement is followed by the pilot plug which is opposed by the pilot spring. 4 | Baker Hughes © 2023 Baker Hughes Company. All rights reserved. -
Page 5: Numbering System
O-Ring seal Zero lock nut Vent plug Output Feedback spring Plug Supply Socket head screw Safety screw * O-Ring seal is not visible. © 2023 Baker Hughes Company. All rights reserved. Masoneilan 47xxP/E Positioner CU TR Instruction Manual | 5... -
Page 6: Ex Markings
Do not open when an explosive gas atmosphere is present. • “X” Marking on label - Potential electrostatic charging hazard. See instructions for safe use. • Use cables rated to ≥ 5°C above ambient. 6 | Baker Hughes © 2023 Baker Hughes Company. All rights reserved. -
Page 7: Electrical Connections And Conduit Entry
▪ For identification machining thread, check the part number sticker on the Model 4000 I/P Converter body: 00-055100106-888 ½ NPT 00-055100212-888 ▪ Adaptors or reducers if apparatus certified ATEX or IECEx. © 2023 Baker Hughes Company. All rights reserved. Masoneilan 47xxP/E Positioner CU TR Instruction Manual | 7... -
Page 8: Assembly Of A 47Xxe Positioner On A Valve
0, 1 and 2 or in flammable dust explosive atmosphere group IIIC zones 20, 21 and 22. Explosionproof instrument can be installed in flammable dust explosive atmosphere group IIIC zones 21 and 22. 8 | Baker Hughes © 2023 Baker Hughes Company. All rights reserved. - Page 9 9 | Baker Hughes © 2023 Baker Hughes Company. All rights reserved.
- Page 10 OF USE, E.G. IEC/EN 60079-14. INSTALLATION SHALL ALSO BE IN ACCORDANCE WITH THE MANUFACTURER'S GUIDELINES. 6. SPECIAL CONDITIONS FOR SAFE USE SPECIFIED ON CERTIFICATES SIRA 02ATEX 2277X MUST BE OBSERVED. 10 | Baker Hughes © 2023 Baker Hughes Company. All rights reserved.
-
Page 11: Start-Up
Before carrying out any work on the device, check that the local conditions in the potentially explosive atmosphere zone permit the safe opening of the cover (C). © 2023 Baker Hughes Company. All rights reserved. Masoneilan 47xxP/E Positioner CU TR Instruction Manual | 11... -
Page 12: During Maintenance Activity
1 (zone 0) against potential inflammable source causing by sparks in the event of impact or friction. ▪ The current source supply connected on the Model 4000 connectors must be certified for use in group IIC © 2023 Baker Hughes Company. All rights reserved. Masoneilan 47xxP/E Positioner CU TR Instruction Manual |12... -
Page 13: For Flameproof
The cable entry and the cable must be compatible with the minimum temperature of -40°C indicated on the marking plate. ▪ The cable entry must have a protection level at least equal to IP66/67. © 2023 Baker Hughes Company. All rights reserved. Masoneilan 47xxP/E Positioner CU TR Instruction Manual |13... -
Page 14: Appendix A : 47Xxp/E Customs Union Information
Check with your local environmental, health or solid waste agency for more information on waste management options. AUTHORIZED CONTACTS: Baker Hughes Services Kazakhstan LLP“Q2” business centre, 2nd fl, 15/1 Kabanbay Batyr Avenue,010000, Nur-Sultan, Kazakhstan. +7 7172 476020/476670. AstanaHelpDesk@BakerHughes.com MANUFACTURED BY: Dresser LLC. - Page 15 Copyright 2023 Baker Hughes Company. All rights reserved. Baker Hughes provides this information on an “as is” basis for general information purposes. Baker Hughes does not make any representation as to the accuracy or completeness of the information and makes no warranties of any kind, specific, implied or oral, to the fullest extent permissible by law, including those of merchantability and fitness for a particular purpose or use.
Need help?
Do you have a question about the Masoneilan 47 P Series and is the answer not in the manual?
Questions and answers