Print From Usb - Toshiba E-STUDIO 5518A Manual

Hide thumbs Also See for E-STUDIO 5518A:
Table of Contents

Advertisement

Print from USB

Printing from USB lets you print PDF, Encrypted PDF, JPEG, XPS, PRN (.PRN) and PostScript
(.PS) print files stored on a memory stick connected to the system's USB port
1. Connect USB storage
device to the USB port on the
NOTE: The e-STUDIO's USB port, depending on the model, is
system. After a few seconds,
located as shown in the image below. On other e-STUDIO models,
"Found USB Device"
find the USB port on the upper-right corner of the main body of the e-
STUDIO.
appears on the touch panel.
Note:
Exercise caution when
the message
"USB DEVICE
in use – Do not remove USB
DEVICE"
appears. Do not
disconnect the USB device
while this message is
displayed as it could destroy
data in the USB device or
cause a malfunction in your
system.
2.
Tap the Print button on
the HOME screen.
3. Select USB from the JOB
TYPE drop-down box.
Note: If your system is
managed by department
codes, you will be prompted
to enter your department's
password at this point.
e-STUDIO Job Shops
64

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio 6518aE-studio 7518aE-studio 8518a

Table of Contents