Basic Operations - Inkbird IHC-200-WIFI Manual

5.3 Icons in this Manual
Symbol Icon Function
Humidity Setting
HS
Value
Humidification
HD
Difference Value
Dehumidification
DD
Difference Value
Alarm High
AH
Humidity Limit
Alarm Low
AL
Humidity Limit
Dehumidification
PT
Delay Time
CA Humidity Calibration
06

Basic Operations

6.1 Instructions for Humidity Control
Setting(HS,HD,DD)
The PV Screen displays the measured value
of current humidity when working normally,
recognize and switch between
humidification mode and dehumidification
mode automatically.
Setting Value (HS)-Humidification Differential
Value (HD), the equipment will enter
humidification state, the red led is on, WORK1
output socket turns on. If the measured
the red led is off, WORK1 output socket turns
off.
13
Setting factory
Note
Range Settings
50.0%RH
5.0%RH
5.0%RH
5.0%RH
0 Minute
0.0%RH