Advertisement
Advertisement
Table of Contents
Related Manuals for Inkbird IHC-200-WIFI
Summary of Contents for Inkbird IHC-200-WIFI
- Page 1 IHC-200-WIFI Humidity Controller...
-
Page 2: Table Of Contents
Contents Introduction -------------------01 Product Features ---------------02 Specifications -------------02~03 Wi-Fi Connection ----------03~07 Settings -------------------08~10 Basic Operations ----------10~13 Sensor Fault Alarm ------------14 Important Safeguards ------14~15 Warranty ------------------15~17... -
Page 3: Introduction
Introduction ⑦ ⑥ US Sockets ① ⑦ ⑥ ② ④/⑤ ③ EU Sockets ⑧ ⑦ ⑥ UK Sockets ⑦ ⑥ AU Sockets ① PV: In the normal mode, it displays current humidity; in the setting mode, it displays menu code. ②... -
Page 4: Product Features
Product Features Plug-n-Play ● Dual Relay Output: Support both humidifying ● equipment and dehumidifying equipment at the same time. Display Screens: Display set humidity value ● and the measured humidity value at the same time. Support Humidity Calibration ● Support Dehumidification Control Delay ●... -
Page 5: Wi-Fi Connection
Scan QR code to download Inkbird Pro APP 4.2 Connect to your phone ① Register before using the Inkbird Pro app. Select your Country/Region, enter your e-mail, then a verification code will be sent to your mailbox, enter it to confirm your... - Page 6 ② Then press “Add Home ”button to create your home. ③ Tap “+” or “add device” button in home page of the APP to add the device. ④ Press and hold the button for 2 WIFI seconds to reset the WIFI when the controller is under normal working state.
- Page 7 sure that the device is in the Smartconfig state(the LED symbol is flashing rapidly, interval flashing 250ms). (2) Check if the LED symbol is blinking rapidly and confirm on your app if it is, then enter your Wi-Fi password to connect to wireless network, click Confirm to connect the device.
- Page 8 connection process. ③ Press “Connect now” and it will go to your WLAN Setting interface on your smart phone, select the “SmartLife-XXXX” to directly connect to the router without putting in password. ④ Go back to the app to enter into the automatic connection interface.
- Page 9 Device Information Device Name Back to Home Page Cancel Alarm Voice Current Humidity Control Mode SV: Humidity Setting Value Humidity Trend Diagram Menu Setting Back to Front Page Humidification Differential Value Dehumidification Differential Value Alarm High Humidity Limit Alarm Low Humidity Limit Dehumidification Delay Time Humidity Calibration 4.5 Wi-Fi State...
-
Page 10: Settings
Settings 5.1 Key Setting 5.1.1 Factory Reset Hold the button and turn on the device, the buzzer will beep shortly to remind the users that all parameters of the the humidity probe are restored to factory settings. 5.1.2 Fast Setting Press the button lightly to enter quick set-up mode and set the value, the SV... - Page 11 button to change the value, the value will be saved automatically when you switch to another menu item by pressing the button. Press and hold the button for 2 seconds to save settings and quit the setting mode, the controller will also quit the setting mode and turn to normal working mode if there’s no operation for 30 seconds.
-
Page 12: Basic Operations
5.3 Icons in this Manual Setting factory Symbol Icon Function Note Range Settings Humidity Setting 5.0%RH ~99.0%RH 50.0%RH Value Humidification 1.0%RH ~20.0%RH 5.0%RH See 6.1 Difference Value Dehumidification 1.0%RH ~20.0%RH 5.0%RH Difference Value Alarm High 5.0%RH ~99.0%RH 99.0%RH Humidity Limit See 6.2 Alarm Low 5.0%RH ~99.0%RH... - Page 13 If the measured Humidity(PV) ≥ Humidity Setting Value(HS)+Dehumidification Differential Value(DD), the equipment will enter dehumidification state, the green led is on, WORK2 output socket turns on. If the green led is blinking, indicating that the dehumidification device is in the state of the dehumidification delay protection, WORK2 output socket turns off.
- Page 14 humidification state. When PV ≥ 50.0%RH, the humidification stops, then return to normal humidity control mode. 6.2 High/Low Humidity Alarm(AH,AL) The equipment will alarm if the value of measured humidity(PV) ≥ the set value of high humidity alarm(AH), the PV screen will display the set value of high humidity alarm(AH) and the current humidity value alternately, the buzzer will alarm like...
- Page 15 time if the measured value is larger than the sum value of set humidity value and dehumification return difference, the equipment will start to dehumidify after the set delay time. The equipment will dehumidify immediately if the interval time of two adjacent dehumidification is longer than the delay time.
-
Page 16: Sensor Fault Alarm
Sensor Fault Alarm If the humidity sensor is in circumstances of short circuit or open circuit, the controller will enter probe fault mode and stop running, the buzzer will alarm and the screen will display ER. You can press any key to stop the buzzer and the controller will back to normal working state when all malfunctions are resolved. -
Page 17: Warranty
Close supervision is necessary when any appliance is used by or near children. Warranty This Limited Warranty applies only to Inkbird IHC-200-WIFI Humidity Controller. What is Covered and for How Long Inkbird warrants that all new products are... - Page 18 Also, the warranty will not apply to damage caused by unauthorized alteration, modification or repair of the product. Inkbird does not warrant or provide service or support for any third party products, including, but not limited to iPhones and Android Phones.
- Page 19 Exclusions and Limitations THIS WARRANTY IS YOUR EXCLUSIVE WARRANTY AND REPLACES ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. AS SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF EXPRESS OR IMPLIED WARRANTIES, THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.
- Page 20 INKBIRD TECH.C.L Support@ink-bird.com www.ink-bird.com +86-755-25738050 Shenzhen,GD,518000,China...