Settings - Inkbird IHC-200-WIFI Manual

05

Settings

5.1 Key Setting
5.1.1 Factory Reset
Hold the button and turn on the device,
the buzzer will beep shortly to remind the
users that all parameters of the the humidity
probe are restored to factory settings.
5.1.2 Fast Setting
Press the button lightly to enter quick
SET
set-up mode and set the value, the SV
screen will display the current setting value
and keep flashing. Press the
the button to change the value, hold the
button or the button to change the value
quickly, press the button again to save
SET
settings and quit the setting mode, the
controller will also save settings and quit
the setting mode if there is no operation for
10 seconds.
5.1.3 Normal Setting
Hold the button for 2 seconds to enter
SET
setting mode when the controller working
normally, the PV screen will display the code
"HS" of the first menu item and the SV
screen will display the corresponding
setting value. Press the
between menu items, press the
11
button or
WIFI
WIFI
button to switch
SET
button or
WIFI