Basic Operation - Boss IR-200 Owner's Manual

Configuring the Settings (Menu)
The memory settings are stored individually in each
memory. Settings aside from memory-related settings
are saved as overall device settings.

Basic Operation

1.
Press the [MENU] button.
You enter menu mode.
2.
Turn the [MEMORY] knob to switch between
pages, and then push a knob below the screen.
3.
Turn the [MEMORY] knob to switch between
pages, and then push a knob below the screen.
The value is displayed.
4.
Turn the three knobs below the screen to
change the respective values.
Turn the [MEMORY] knob to switch between pages.
Press the [EXIT] button to return to the previous
screen.
5.
Press the [MENU] button.
This takes you to the top of the MENU screen.
12
Assigning functions to external pedals
You can switch the amp SOLO switch on/off or switch between
memories if you connect a footswitch ( sold separately: FS-5U, FS-6,
or FS-7 ) to the CTL 1, 2/EXP jack.
Make the settings in the "DOWN/UP FUNCTION / CTL FUNCTION"
(p. 17).
FS-5U x 1 FS-5U x 2
1/4" phone type Stereo 1/4" phone type
,
1/4" phone type 1/4" phone type x 2
FS-5U FS-5U x 2
CTL 1 CTL 2 CTL 1
Polarity switch
FS-5U
FS-6 or FS-7
Stereo 1/4" phone type
, ,
Stereo 1/4" phone type
FS-6, FS-7
CTL 2 CTL 1
FS-6, FS-7
CTL 2
CTL 1