Boss IR-200 Owner's Manual page 19

EXP PDL HOLD
Parameter Value
Specifies whether or not the operational status of
the EXP PEDAL's FUNCTION is carried over when
EXP PDL HOLD
memories are switched.
ON, OFF
USB
Parameter Value
See the block diagram for details.
VENDOR:
computer, use the "VENDOR" setting.
Download and install the IR-200 driver from the
Roland website.
MODE
GENERIC:
the "GENERIC" setting.
The unit operates using standard iOS functionality.
Some functions may be limited when compared
with the VENDOR setting.
USB VENDOR
Parameter Value
0–200:
The guitar sound that is input to the IR-200,
DRY OUT is output without change (DRY sound); it is not
(DRY OUT LEVEL)
processed by effects.
0–200:
Adjusts the input level from the computer to
EFX IN
(EFX IN LEVEL)
the IR-200's effects.
When connecting to a Windows or macOS
When connecting to an iOS device, use
Configuring the Settings (Menu)
Parameter Value
0–200:
Adjusts the level of the sound that is output
EFX OUT to the computer from MAIN OUT after passing
(EFX OUT LEVEL)
through the IR-200's effects.
0–200: Adjusts the level of the input sound from
the computer. At this time, the input sound from the
MIX IN
(MIX IN LEVEL)
computer is mixed at the final stage of the IR-200's
MAIN OUT.
LOOPBK SW OFF, ON:
sound from your computer back to the computer.
(LOOPBACK SW)
LB LEVEL 0–200: Adjusts the level of the sound looped back
to the computer.
(LOOPBACK LEVEL)
USB GENERIC
Parameter Value
0–200:
Adjusts the level of sound output to the
EFX OUT
computer after passing through the effects of the
(EFX OUT LEVEL)
IR-200.
0–200: Adjusts the level of input sound from the
computer. With this setting, the input sound from
MIX IN
(MIX IN LEVEL)
the computer is mixed into the final stage of the
IR-200 signal chain.
OTHER
Parameter Value
OFF: The power will not turn off automatically.
ON: The power will automatically turn off when 10
AUTO OFF
hours have passed since you last played or operated
theIR-200
Turn this on to send (loop back) the input
19