Ground Terminal; Getting Ready - Boss IR-200 Owner's Manual

Panel Descriptions
H
CTL 1,2/EXP jacks
Using the jack as CTL 1, 2
You can connect a footswitch (sold separately: FS-5U, FS-6,
or FS-7) and use it to switch the SOLO SW ON/OFF or switch
memories (p. 12).
Using the jack as EXP
You can connect an expression pedal (sold separately:
EV-30, Roland EV-5, etc.) and use it to control the amount of
gain or the volume of the effect sound (p. 17).
* Use only the specified expression pedal. By connecting any other
expression pedals, you risk causing malfunction and/or damage
to the unit.
I
USB port
Connect your computer using a commercially available USB
cable that supports USB 2.0.
* Do not use a micro USB cable that is designed only for charging a
device. Charge-only cables cannot transmit data.
J

Ground terminal

* Connect this to an external earth or ground if necessary.
6

Getting Ready

Set the type of amp that you'll connect to the OUTPUT
(A/MONO, B) jacks.
1.
Press the [MENU] button.
2.
Push the knob below the "SYSTEM" indication
on the screen.
3.
Push the knob below the "OUTPUT SELECT"
indication on the screen.
4.
Set the TYPE for A, B.
MEMO
Turning STEREO LINK on lets you configure OUTPUT A
and B together.
& For details on the parameter, refer to the
SELECT"
(p. 18).
"OUTPUT