Side Panel; Aux In Jack; Phones Jack - Boss IR-200 Owner's Manual

Turning On/Off the Power
* Once everything is properly connected, be sure to follow the
procedure below to turn on their power. If you turn on equipment
in the wrong order, you risk causing malfunction or equipment
failure.
* Before turning the unit on/off, always be sure to turn the volume
down. Even with the volume turned down, you might hear some
sound when switching the unit on/off. However, this is normal and
does not indicate a malfunction.
When powering up
Power-up equipment such as your guitar amp last.
When powering down
Power-down equipment such as your guitar amp first.
* The power to this unit will be turned off automatically after a
predetermined amount of time has passed since it was last used
for playing music, or its buttons or controls were operated (Auto
Off function).
If you do not want the power to be turned off automatically,
disengage the Auto Off function (p. 19).
5 Unsaved data is lost when the power turns off. Before turning the
power off, save the data that you want to keep.
5 To restore power, turn the power on again.

Side Panel

H
F G
F

AUX IN jack

Connect your audio player using a cable with a stereo
mini plug. The audio signal input through AUX IN is mixed
with the sound of this unit and is sent to the OUTPUT and
PHONES jacks. Adjust the volume on the audio player side.
G

PHONES jack

Used for connecting headphones (sold separately).
Turn surround on to make it seem as if the amp was
sounding right in front of you.
& "SYSTEM paramemter" (p. 17) 0 SURROUND
parameters for PHONES
Panel Descriptions
I
J
5