Mar. 2006 AC-3 SERVICE NOTES Issued by RJA Table of Contents Cautionary Notes ..............2 Parts List ................5 Specifications ..............2 Checking Version Number ..........8 Location of Controls ............3 Test Mode ................8 Location of Controls Parts List........3 Circuit Board..............13 Exploded View ..............4 Circuit Diagram ...............14...
(under a different part code). components are mounted. • Because supply is prohibited due to copyright restrictions. Specifications AC-3: Acoustic Simulator Nominal Input Level Dimensions 20 dBu 73 (W) x 129 (D) x 59 (H) mm...
Mar. 2006 AC-3 Location of Controls fig.panel.eps 12 11 REVERB LEVEL LINE OUT G.AMP OUT INPUT Location of Controls Parts List Part Code Part Name Description Q’ty 22480220R0 P R-KNOB BF BLK/LCG (INTERNAL) 22480221R0 P R-KNOB S BLK/LCG (EXTERNAL) F3279854R0...
Mar. 2006 AC-3 Exploded View fig.exploded.eps Exploded View Parts List Part Code Part Name Description Q’ty 13129710R0 SWITCH (PUSH) JM-0404 22267333R0 CUSHION F3419102R0 BATTERY CONNECTOR 006P BATTERY SNAP G2537516R0 PSA CAUTION CE 9V N225 22357305R0 BOTTOM BASE 22027851R0 BOTTOM COVER...
Mar. 2006 AC-3 Parts List fig.part1j Due to one or more of the following reasons, SAFETY PRECAUTIONS: parts with parts code ******** cannot be supplied as service parts. The parts marked have safety-related characteristics. Use only listed parts for replacement.
Mar. 2006 AC-3 Checking Version Number Test Mode A (2. DC Leakage Check–10. MODE Switching Check) Connect an AC adaptor. Connect an AC adaptor. Adjust the REVERB, LEVEL, BODY and TOP knobs to MIN. Adjust all of the REVERB, LEVEL, BODY and TOP knobs to MIN.
Page 9
While the CHECK indicator lights, CPU and DSP are tested automatically. If you pull out the plug connected to the INPUT jack, AC-3 exits the test mode If there is no problem, the CHECK indicator blinks and turns off. and turns off the power.
Page 10
Mar. 2006 AC-3 6. TOP Volume Check Remove the connection of the LINE OUT jack, and connect an oscilloscope to the G.AMP OUT jack. * If the maximum value of BODY volume isn’t detected, the TOP Volume Check 10. Confirm the output waves of LINE OUT and G.AMP OUT are as follows.
Page 11
Mar. 2006 AC-3 9. AF/AD Check 11. Cross Talk Check Adjust the MODE knob to PIEZO. Enter Test Mode B. Refer to Test Mode B (11. Cross Talk Check) (p. 8). The CHECK indicator turns on. While the CHECK indicator lights, CPU and DSP are tested automatically.
Page 12
Remove the plug connected to the LINE OUT jack, and connect the monitor speaker to the G.AMP OUT jack. 10. Drop the AC-3 twice from the height of about 10 cm to shock its body. 11. Confirm no abnormal noise sounds from the speaker.
Need help?
Do you have a question about the AC-3 and is the answer not in the manual?
Questions and answers