Boss IR-200 Owner's Manual page 9

Saving and Switching Memories
Saving to Memory
(WRITE)
You can save the settings for the effects you edit.
1.
Press the [MENU] button and [EXIT] button
simultaneously.
The WRITE UTILITY screen appears.
2.
Push the knob below the "WRITE" indication on the
screen.
3.
Use the [AMP] (TARGET) knob to select the save
destination, and push the [MEMORY] (ENTER)
knob.
If you decide to cancel, press the [EXIT] button.
4.
Specify the memory name.
Controller
[AMP] (CHAR) knob
[CABINET] (CURSOR) knob
[AMBIENCE](Aa0!) knob
[EXIT] button
5.
Push the [MEMORY] (ENTER) knob.
The memory is saved.
Explanation
Changes the character.
Moves the cursor.
Selects the type of characters.
Returns to the previous screen.
Switching Memories
Here's how to recall a saved memory.
1.
Push the [MEMORY] knob to move the cursor to
the memory number.
2.
Turn the [MEMORY] knob to select the memory.
You can also use the [I] and [H] switches to switch
between memories.
9