Boss IR-200 Owner's Manual page 17

Parameter Value
TONE -50–+50:
0–100: Adjusts the reverberation volume.
LEVEL (EFFECT LEVEL)
DOWN/UP FUNCTION / CTL FUNCTION
Parameter Value
Configures the parameters that are operated with
the footswitch.
FUNCTION
MEMORY, AMP SOLO, EQ, SEND/RET
MEMORY:
AMP SOLO:
PARAM
EQ:
A ON/OFF, B ON/OFF, A+B ON/OFF
SEND/RET:
MEMORY:
PREF
SYSTEM:
memories.
EXP PDL FUNCTION
Parameter Value
Configures the parameter that is operated with the
expression pedal.
FUNCTION
OFF, AMP GAIN, AMP LEVEL, AMP SOL LV, SEND
LEVEL, RET LEVEL
0–100: Configures the lower limit of the variable
MIN range for the parameter that is operated with the
expression pedal.
Adjusts the reverberation's tonal character.
DEC, INC, 1–128
ON/OFF
ON/OFF
Changes the settings per memory.
Makes the settings the same for all
Configuring the Settings (Menu)
Parameter Value
0–100 (FUNCTION = AMP GAIN: 0–120):
Configures the upper limit of the variable range for
MAX
the parameter that is operated with the expression
pedal.
MEMORY:
PREF
SYSTEM:
memories.
Overall Device Settings
SYSTEM paramemter
INPUT
Parameter Value
MEMORY:
separately.
PREF
(PREFERENCE)
SETTING 1–10:
by all memories.
SETTING 1–10:
Selects the setting number.
-20dB–+20dB:
LEVEL
the output level of the guitar that you've connected.
Changes the settings per memory.
Makes the settings the same for all
Specifies the settings for each memory
The same setting number is shared
Adjust the input level according to
17