Table of Contents
Advertisement
Owner's Manual
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Owner's Manual (this document)
Read this first. It explains the basic things you need to know in
order to use the GT-1000CORE.
PDF Manual (download from the Web)
5 Parameter Guide
This explains all parameters of the GT-1000CORE.
5 Sound List
This is a list of the sounds built into the GT-1000CORE.
5 MIDI Implementation
This is detailed information about MIDI messages.
2
2
3
. . . . . .
3
3
3
3
4
4
4
5
. . . . . . . . . . . . . .
5
6
. . . . . . . . . . . . . . . . . . . . . . . .
6
6
7
7
. . . . . . . . . . . . . . .
7
. . . . . . . . . . . . . . . .
8
8
9
9
. . . . . . . . . .
9
. . . . . . .
9
. . .
10
. . . . . . . . . . . . . . . . . . . . . . .
10
10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Before using this unit, carefully read "USING THE UNIT SAFELY" and
"IMPORTANT NOTES" (leaflet "USING THE UNIT SAFELY" and Owner's
Manual (p. 16, 17)).After reading, keep the document(s) where it will
be available for immediate reference.
To obtain the PDF manual
1.
Enter the following URL in your computer.
http://www.boss.info/manuals/
2.
Choose "GT-1000CORE" as the product name.
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
© 2020 Roland Corporation
I
11
11
11
12
12
12
13
13
13
14
15
15
15
15
16
16
17
Advertisement
Table of Contents
Related Manuals for Boss GT-1000CORE
Summary of Contents for Boss GT-1000CORE
-
Page 1: Table Of Contents
5 Parameter Guide http://www.boss.info/manuals/ This explains all parameters of the GT-1000CORE. 5 Sound List Choose “GT-1000CORE” as the product name. This is a list of the sounds built into the GT-1000CORE. 5 MIDI Implementation This is detailed information about MIDI messages. -
Page 2: Getting Ready
* You can use the CTL4, 5/EXP 2 jack to switch the channels of your guitar amp. For and does not indicate a malfunction. details, refer to “GT-1000CORE Parameter Guide” (PDF). NOTE * Use only the specified expression pedal. By connecting any other expression While the display indicates “SAVING..., ”... -
Page 3: Turning The Power On
(TUNER MODE) tuner. 435–445 Hz Pitch Specifies the reference pitch. (default: 440 Hz) For details on the amp types, refer to the “GT-1000CORE Sound will not be output Parameter Guide” (PDF). MUTE while tuning. While tuning, the sound of MEMO... -
Page 4: Playing
Playing Show effect configuration Selecting a Patch A combination of effects and their settings is called a “patch. ” User patch (U001–U250) Can be overwritten Patch Icons shown in the play screen Preset patch (P001–P250) Cannot be overwritten, however, you can write a Preset patch into the User area, modify the Areas which icons are displayed settings to your needs and store your modified... -
Page 5: Selecting The Control Mode
This mode lets you use the [ I ] switch and Using the GT-1000CORE with a Bass [ H ] switch to operate the functions that are assigned to them by each patch or by the Guitar settings for the entire system. -
Page 6: Editing: Effects
The edit screens show the block configuration (effect chain) of a list of all parameters of the selected block. You can edit the all effects provided by the GT-1000CORE, as well as the output parameters from this list. and send/return. You can edit from this effect chain display by selecting the block that you want to edit. -
Page 7: Using Stompbox
Editing: Effects Switching patches without interrupting the sound Editing the STOMPBOX The GT-1000CORE is equipped with a new type of high-speed Turn knobs [1]–[5] to edit the parameter value that are patch switching system, allowing you to switch patches with shown in the screen. -
Page 8: Writing Patch Settings Into A Stompbox
Editing: Effects Writing Patch Settings into a STOMPBOX Saving a Patch When you want to save a patch you have created, save it as a Press the [EFFECT] button. user patch by following the procedure below. If you do not save Use the [SELECT] knob to choose the effect you’re going to the patch, the edited settings will be lost when you turn off the save. -
Page 9: Editing: Menu
Basic MENU Operations Assigning Favorite Parameters to [1]–[5] Knobs Here you can make settings that are common to the entire GT-1000CORE (system parameters). Here’s how to assign the parameters that are controlled by knobs [1]–[5] when the play screen (p. 4) is shown. -
Page 10: Restoring The Factory Default Settings (Factory Reset)
Restoring the Factory Default Settings Turning Off the Auto Off Function (Factory Reset) The GT-1000CORE can turn off its power automatically. The power will turn off automatically when 10 hours have passed since you Restoring the GT-1000CORE’s settings to their original factory last played or operated the unit. -
Page 11: Connecting To A Computer
Connecting to a Computer By connecting the GT-1000CORE to a computer via USB, you can do the following. USB COMPUTER port 5 Transmit and receive digital audio signals between the computer and the GT-1000CORE 5 Edit and manage patches, and display the “GT-1000CORE Parameter Guide”... -
Page 12: Connecting With An External Midi Device
Connecting with an External MIDI Device On the GT-1000CORE, you can use MIDI to perform the following operations. Operations from the GT-1000CORE Operation Explanation When you select a patch on the GT-1000CORE, the program change message specified by PATCH MIDI Transmit program is also transmitted. -
Page 13: Footswitch And Expression Pedal Settings
Footswitch and Expression Pedal Settings A variety of functions can be assigned each of the [ I ], [ H ], [CTL1] Making Assignments from the Effect Edit switches on the top panel, and expression pedals or footswitches Screen (Quick Assign) that are connected to the rear panel CTL2, 3/EXP1 jack and side panel CTL4, 5/EXP2 jack (p. -
Page 14: Connecting External Pedals
Footswitch and Expression Pedal Settings Connecting External Pedals Rear Panel Side Panel (Left) FS-5U x 2 FS-5U x 1 FS-6 FS-7 EXP 1 Stereo 1/4” phone type 1/4” phone type Stereo 1/4” phone type Stereo 1/4” phone type EXP 2 1/4”... -
Page 15: Looper
To use the looper, you must first assign the looper’s record, play, and overdub functions to the desired switches. Here we explain an example of how you can use the [CTL1] switch of the GT-1000CORE to operate the looper. Select the patch with which you want to use the looper. -
Page 16: Main Specifications
Main Specifications Sampling Current Draw 670 mA 96 kHz Frequency 173 (W) x 135 (D) x 63 (H) mm AD/DA 6-13/16 (W) x 5-3/8 (D) x 2-12 (H) inches 32 bits conversion Dimensions 173 (W) x 135 (D) x 65 (H) mm Processing 32-bit floating point 6-13/16 (W) x5-3/8 (D) x 2-9/16 (H) inches (including... -
Page 17: Important Notes
• Before sending the unit away for repairs, be sure to make a backup of the data stored within it; or you may prefer to write down the needed • Roland and BOSS are either registered trademarks or trademarks of information. Although we will do our utmost to preserve the data stored Roland Corporation in the United States and/or other countries.
Need help?
Do you have a question about the GT-1000CORE and is the answer not in the manual?
Questions and answers
Is there an alternative to turning power on and off other than unplugging the unit
No, the only manual way to turn the Boss GT-1000CORE off is by cutting the power, such as unplugging the power input connector or using an external switch on the power cable. The auto power-off function exists but may not work reliably, especially when the unit is connected via USB.
This answer is automatically generated