Mitsubishi Electric 800 Series Instruction Manual page 50

 Operation of protective functions during emergency drive
• Operation of protective functions during emergency drive is as follows.
Protective Operation during
function emergency drive
E.OC1 Retry
E.OC2 Retry
E.OC3 Retry
E.OV1 Retry
E.OV2 Retry
E.OV3 Retry
E.THT Retry
E.THM Retry
E.FIN Retry
E.IPF The function is disabled.
E.UVT The function is disabled.
E.ILF The function is disabled.
E.OLT Retry
E.SOT Retry
E.LUP The function is disabled.
E.LDN The function is disabled.
*1
E.BE
Retry
E.GF Retry
E.LF The function is disabled.
*1 While the switchover to the commercial power supply operation during emergency drive operation is enabled, when the same
protective function is activated twice consecutively, the retry is attempted up to twice.
*2 In normal operation (Pr.523 = "200 or 300"), the start signal is turned OFF at the same time the retry function resets the protective
function. Input the start signal again to resume the operation.
Protective Operation during
function emergency drive
E.OHT Retry
E.PTC Retry
E.OPT The function is disabled.
E.OP1 The function is disabled.
E.OP2 The function is disabled.
E.OP3 The function is disabled.
E.16 The function is disabled.
E.17 The function is disabled.
E.18 The function is disabled.
E.19 The function is disabled.
E.20 The function is disabled.
E.PE Output shutoff
E.PUE The function is disabled.
E.RET Output shutoff
E.PE2 Output shutoff
E.CPU Retry
E.CTE The function is disabled.
E.P24 The function is disabled.
E.CDO Retry
3
Protective Operation during
function emergency drive
E.IOH Output shutoff
E.SER The function is disabled.
E.AIE The function is disabled.
E.USB The function is disabled.
*1
E.SAF
Retry
*1
E.PBT
Retry
E.OS The function is disabled.
E.IAH Retry
E.LCI The function is disabled.
E.PCH The function is disabled.
E.PID The function is disabled.
*2
E.1
Retry
*2
E.2
Retry
*2
E.3
Retry
*2
E.5
Retry
*1*2
E.6
Retry
*1*2
E.7
Retry
E.13 Output shutoff
BCN-C22005-963