Table of Contents
Advertisement
NL
Operation of the device
Start program
touch the IStart/Reload (Start/
refill) button and hold it for about 1-2
seconds, then release the button. The
program starts and the appliance door is
locked.
The Ready in time is shown on the display
panel and counts down until the program
starts. After the program has started, the
program duration is displayed. And the
symbols for the progress of the program
are lit.
Child lock
You can lock the device to prevent
accidental changes to the settings you
have made. To do this, activate it
child lock.
To activate the child lock:
After the program starts, the buttons
(varioSpeed and B Finish in/Time Dry
touch and
hold for 3 seconds. Itw symbol lights up
on the
dis
play panel.
w lights up: the child lock is activated.
■
wflashes: when the programs and
■
program settings are set while the
child lock is activated.
Note:
When the program ends, "Ÿš (End)
displayed. The door is unlocked.
w stays on to remind you to deactivate the
child lock.
To deactivate the child lock: Touch the
buttons (varioSpeed and
B Finish in/Time Dry
dry time) and hold it until the . symbol w
disappears.
42
Add/Remove from
laundry
After starting the program (which only
performs washing), you can add or
remove laundry if necessary.
touch the IStart/Reload (Start/
refill) button on. The appliance checks
whether laundry can be refilled.
When the following appears on
the display panel:
The symbol O disappears, refilling is
■
possible.
The symbol O lights up, refilling
■
is not possible.
To resume the program, you must I
Start/Reload
touch the button. The program
continues automatically.
Clues
Do not leave the door open for too
■
long when adding laundry, otherwise
water from the laundry may leak out of
the appliance.
For safety reasons, the door remains
■
locked when the water level or
temperature is too high or
when the drum rotates and it is not
possible to add laundry at that time.
Changing the program
If you accidentally started the wrong
program, you can change the
program as follows:
1.
touch the IStart/Reload button on.
2.
Choose another program.
3.
And touch the IStart/Reload (Start/
refill) button again. The new program
starts from the beginning.
Advertisement
Table of Contents
