Related Manuals for Siemens WN44A2X0GC
Summary of Contents for Siemens WN44A2X0GC
- Page 1 Washer dryer WN44A2X0GC WN44A2XSGC siemens-home.bsh-group.com/welcome Register your product online...
- Page 2 Your new washer dryer Note/tip Information about the optimum use of You have chosen a Siemens washer the appliance/any other useful dryer. information. Please take a few minutes to read and 1. 2. 3. / a) b) c) become familiar with the advantages of your washer dryer.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. -
Page 4: Intended Use
Intended use Cleaning and maintenance . . . 43 Intended use Appliance housing/control panel . . . 43 Drum ......43 This appliance is intended for private ■... -
Page 5: Safety Instructions
Safety instructions The appliance may be used Before you switch on the appliance: ■ by children over the age of 8 Check that there is no visible damage to years and by persons with the appliance. Do not operate the appliance if it is damaged. -
Page 6: Installation
Safety instructions Once an appliance has Installation ■ reached the end of its life, Warning pull the mains plug from the Risk of electric shock/fire/ socket before severing the material damage/damage to mains cable, and then the appliance! destroy the lock on the If the appliance is not installed appliance door. - Page 7 Safety instructions The mains plug must be Warning ■ freely accessible at all times. Risk of fire/material damage/ If this is not possible, in damage to the appliance! order to comply with the The use of extension cords or relevant safety regulations, a power strips may result in fire switch (all pole due to overheating or short...
- Page 8 Safety instructions If the water hoses are altered Warning ■ or damaged, this may result Risk of injury! in material damage or The appliance is very heavy. ■ damage to the appliance. Lifting it may result in injury. The water hoses must not be Do not lift the appliance on kinked, crushed, altered or your own.
-
Page 9: Operation
Safety instructions Certain objects may ignite Operation ■ when drying is in progress, Warning or even cause the appliance Risk of explosions/fire! to catch fire or explode. Laundry that has come into Remove any lighters or contact with solvents, oil, wax, matches from pockets on wax remover, paint, grease or items of clothing. - Page 10 Safety instructions Warning Warning Risk of poisoning! Eye/skin irritation! Poisonous fumes may be given Detergent and care products off by cleaning agents that may spray out if the detergent contain solvents, e.g. cleaning drawer is opened while the solvent. appliance is in operation. Do not use cleaning agents that Rinse eyes/skin thoroughly if contain solvents.
-
Page 11: Cleaning/Maintenance
Safety instructions If you pour the wrong Repairs and any other work ■ ■ quantity of detergent or on the appliance must only cleaning agent into the be conducted by our appliance, this may result in customer service or by an material damage or damage electrician. -
Page 12: Environmental Protection
Environmental protection Warning Environmental Risk of injury/material protection damage/damage to the appliance! P ackaging/used appliance The use of spare parts and E n v i r o n m e n t a l p r o t e c t i o n accessories supplied by other Dispose of packaging in an environmentally-responsible... -
Page 13: Energy Saving Mode
Positioning and connecting Reduce the washing temperature for Positioning and lightly and normally soiled laundry. connecting At low temperatures, the appliance ■ consumes less energy. For light to S tandard accessories normal soiling, lower temperatures P o s i t i o n i n g a n d c o n n e c t i n g than indicated on the care label are Check the appliance for transport Note:... -
Page 14: Safety Instructions
Positioning and connecting When the appliance is lifted by its Mains lead ■ protruding parts (e.g. the appliance Bag: door), the components may break Installation and operating ■ off and cause injuries. instructions Do not lift the appliance by Customer Service location protruding parts. -
Page 15: Installation On A Base Or A Wooden Joist Floor
Positioning and connecting Installation on a base or a Removing the transport locks wooden joist floor Caution! Damage to the appliance Caution! The appliance is secured for Damage to the appliance ■ transportation using transport locks. The appliance may "wander" and tip/ If the transport locks are not topple from the base when spinning. -
Page 16: Removing The Support Struts
Positioning and connecting Unscrew and remove all four Lock the covers firmly in place by transport brace screws. applying pressure to the snap-in hooks. a) Remove the mains cable from the Removing the support struts holders. Unscrew and remove all screws in the vertical transport struts. -
Page 17: Hose And Cable Lengths
Positioning and connecting Undo and remove the screws on the horizontal transport strut. Connection on right side Remove the transport strut. ( ~ 90 cm 0 ~ 195 cm 8 ~ 135 cm @ 60 cm ~ 100 cm The following are available from Tip: specialist dealers/the after-sales service:... - Page 18 Positioning and connecting Do not use a used supply hose. Only – Model: AquaSecure ■ use the supply hose supplied or one that was purchased from an authorised specialist retailer. Do not bend, squash, modify or cut ■ through the water supply hose (otherwise its strength is no longer guaranteed).
-
Page 19: Water Outlet
Positioning and connecting Water outlet Connection Drainage into a siphon Warning ■ The connection point must be Risk of scalding! secured using a hose clamp with a When you are washing at high diameter of 24 - 40 mm (available temperatures, there is a risk of scalding from specialist dealers). -
Page 20: Alignment
Positioning and connecting Check the alignment of the Drainage into a plastic pipe with ■ appliance with a spirit level, and rubber bushing or into a drainage adjust it if necessary. Change the height by turning the appliance feet. All four appliance feet must stand firmly on the ground. -
Page 21: Electrical Connection
Positioning and connecting Electrical connection Before washing for the first time Warning The appliance was inspected Risk of death! thoroughly before leaving the factory. To There is a risk of electric shock if you remove any residual test water, run the touch live components. -
Page 22: Transportation
Positioning and connecting Transportation Insert all four sleeves. e.g. when moving home Preparatory work: Turn off the water tap. Reduce the water pressure in the supply hose. ~ Page 46 Drain any residual water. ~ Page 44 Disconnect the appliance from the mains. - Page 23 Positioning and connecting Before switching on the appliance again: Notes The support struts must be ■ removed. ~ "Removing the support struts" on page 16 The transport braces must be ■ removed. ~ "Removing the transport locks" on page 15 Pour approx.
-
Page 24: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance A ppliance G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer Control panel Loading door Service flap... -
Page 25: Control Panel
Getting to know the appliance Control panel Programme default settings can be changed. Overview of all programme default settings ~ Page 35 Additional programme settings can be selected. Overview of all additional programme settings ~ Page 36 Start/Pause button for starting, interrupting, (e.g. -
Page 26: Display Panel
Getting to know the appliance Display panel Additional programme settings Programme default settings Display Setting Drying aim Ô ¾/»/Ø Display Setting Description Stains Ì/ë/â/ì Ž - 90° Temperature Temperature that Prewash can be set in °C Easy iron Ž = cold æ... -
Page 27: Laundry
Laundry Sorting laundry Laundry Sort your laundry according to the care P reparing laundry for washing instructions and manufacturer's L a u n d r y information on the care labels, depending on: Protecting your laundry and appliance Type of fabric/fibre ■... -
Page 28: Preparing Laundry For Drying
Laundry Preparing laundry for drying Starching To ensure an even drying result, Laundry should not be treated Note: Note: sort the laundry according to the: with fabric softener. Type of fabric ■ Switch on the appliance. Care symbols which are indicated on ■... -
Page 29: Detergent
Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial to ensure correct detergent selection, temperature Saving Soiling/note... -
Page 30: Overview Of Programmes
Overview of programmes Overview of programmes S electable programme O v e r v i e w o f p r o g r a m m e s Programme/Type of laundry Options/Information Name of the programme Max. load for washing/ Max. - Page 31 Overview of programmes Programme/Type of laundry Options/Information Eco 40-60 9,0 kg/6,0 kg Suitable for washing normally soiled cotton, linen and mixed fabric textiles and drying it to be immediately stored in a cup- 400 - 1400 rpm board. Stains, Prewash, Easy iron Notes Textiles which are washable based on the laundry symbol Drying aim Ô...
- Page 32 Overview of programmes Programme/Type of laundry Options/Information Outdoor/Waterproofing 1,0 kg/1,0 kg Wash cycle followed by waterproofing of membrane-coated Ž - 40 °C weatherproof and outdoor clothing or water-resistant fabrics 400 - 800 rpm Notes Stains Use special detergent that is suitable for machine washing; ■...
- Page 33 Overview of programmes Programme/Type of laundry Options/Information Wool h 2,0 kg/1,0 kg Hand- or appliance-washable fabrics that are made of wool or Ž - 40 °C contain wool; 2 - 800 rpm particularly gentle wash programme to prevent laundry from shrinking, with longer pauses in the programme (during which the items rest in the water).
-
Page 34: Drying Table
Overview of programmes Programme/Type of laundry Options/Information Gentle dry -/2,5 kg Single gentle dry programme for drying garments with lower temperature, - by selecting ¾ to achieve automatic cupboard+ dry result, - by selecting » to achieve automatic cupboard dry result, Drying aim Ô... -
Page 35: Programme Default Settings
Programme default settings Ready in/Time Dry Programme default Before starting the programme, you settings can preselect the programme end ("Finish in" time) in 0.5h (h = hour) Y ou can change the default settings for increments (between “minimum P r o g r a m m e d e f a u l t s e t t i n g s selected programmes. -
Page 36: Additional Programme
Additional programme settings Ø (Iron Dry): For delicate laundry. Additional programme Fabrics suitable for ironing (iron fabrics in order to avoid creasing). Garments settings can be additionally hung up to dry. You can find possible additional N ote: The drying process would proceed A d d i t i o n a l p r o g r a m m e s e t t i n g s programme settings in the overview;... -
Page 37: Prewash
Operating the appliance Prewash Operating the Prewash for heavily soiled laundry. appliance Touch Prewash to activate or P reparing the appliance deactivate it. O p e r a t i n g t h e a p p l i a n c e The appliance was tested before Put the detergent into dispenser I Note:... -
Page 38: Select Programme/Switch On The Appliance
Operating the appliance Select programme/switch on Notes Unfold and load presorted items the appliance ■ of laundry. Mix large and small items. Washing items of different If you have activated the Note: size distribute themselves better childproof lock, you must first deactivate during the spin cycle. - Page 39 Operating the appliance Be careful when opening the Filling the dispensers ■ detergent drawer while the appliance Pull out the detergent drawer. is running. Warning Measuring aid A* for liquid detergent Eye / skin irritation! *depending on the model If the detergent drawer is opened while the appliance is running, Position the measuring aid A for detergent/care product may run out.
-
Page 40: Starting The Programme
Operating the appliance Starting the programme Touch the Start/Pause button. The appliance checks whether reloading is Touch and hold Start/Pause button for possible. 1~2 seconds, then release the button. If the following appears on the display The programme starts and the panel: appliance door is locked. -
Page 41: Programme End
Operating the appliance For programmes washing at low Removing laundry/switching temperatures: off the appliance Touch the Start/Pause button. Select Spin/Drain. Set programme selector to Û (Off). Touch the Start/Pause button. Open the door and remove the laundry. For programmes in drying process: Turn off the water tap. -
Page 42: Appliance Settings
Appliance settings 0 = off, 1 = quiet, Appliance settings 2 = medium, 3 = loud, 4 = very loud Y ou can change the following settings: A p p l i a n c e s e t t i n g s 4: Switching the drum care ■... -
Page 43: Cleaning And Maintenance
Cleaning and maintenance Drum Cleaning and maintenance Warning Risk of injury/material damage/ damage to the appliance! Warning C l e a n i n g a n d m a i n t e n a n c e Permanently washing at low Risk of death! temperatures and a lack of ventilation There is a risk of electric shock if touch... -
Page 44: Emptying The Detergent Draw, Cleaning The Detergent Drawer And Its Housing
Cleaning and maintenance Emptying the detergent draw, Fit the insert and lock it in place (push the cylinder onto the guide cleaning the detergent drawer pin). and its housing If the appliance contains detergent or fabric softener residues: Pull out the detergent drawer. Press down the insert and fully remove the drawer. -
Page 45: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance Open the service flap. Refit and screw on the pump cover. The handle must be in a vertical position. Take the drain hose out of the retainer. Remove the sealing cap and pour Close the service flap. the water out into a suitable container. -
Page 46: Filter In The Water Supply Is Blocked
Cleaning and maintenance Clean the drain hose and siphon Clean the filters: connecting piece. Disconnect the hose from the rear of the appliance. Re-attach the drain hose and secure the connection point using the hose Use pliers to remove the filter. clamp. -
Page 47: Faults And What To Do About Them
Faults and what to do about them Open the service flap. Faults and what to do about them E mergency release F a u l t s a n d w h a t t o d o a b o u t t h e m E.g. -
Page 48: Information On The Display Panel
Faults and what to do about them Information on the display panel Display Cause/Remedy Flashes fast + signal: The door was opened and the water level is too high. Õ ■ Close the door, continue the programme with Start/Pause button or select Drain. -
Page 49: Faults And What To Do About Them
Faults and what to do about them Display Cause/Remedy H:32 The unbalanced load detection system has interrupted the spin cycle because the alternating with laundry is unevenly distributed. Distribute small and large items of laundry evenly in the drum. when programme is finished Other displays Turn the programme selector to Û... - Page 50 Faults and what to do about them Faults Cause/Remedy The water is not draining. Drain pipe or water drain hose is blocked. Clean the drain pipe and the ■ water drain hose. Drain pipe or water drain hose is caught or jammed. Ensure that the drain ■...
- Page 51 Faults and what to do about them Faults Cause/Remedy The spin cycle runs sev- Not a fault – the unbalanced load detection system is adjusting an imbalance. eral times. The programme is taking Not a fault – the unbalanced load detection system is adjusting an imbal- ■...
- Page 52 Faults and what to do about them Faults Cause/Remedy Creasing. Creasing occurs when you have exceeded the maximum load or selected ■ the wrong program for the type of fabric. All the required information can be found in the programme overview table. Remove clothes immediately after drying;...
-
Page 53: Customer Service
Customer Service If you contact Customer Service, you Customer Service will require the product number (E-Nr.) and the production number (FD) of your I f you have any queries on use, are appliance. C u s t o m e r S e r v i c e unable to rectify faults on the appliance The contact details for Customer yourself or if your appliance needs to be... -
Page 54: Consumption Values
Consumption values Consumption values E nergy and water consumption, programme duration and residual moisture for C o n s u m p t i o n v a l u e s the main washing programmes (approximate values) Programme Load [kg] Energy consump- Water consumption Programme dura-... -
Page 55: Technical Data
Technical data Technical data Aqua-Stop warranty D imensions: O nly for appliances with Aqua-Stop T e c h n i c a l d a t a A q u a - S t o p w a r r a n t y 84,8 cm x 59,8 cm x 59,0 cm In addition to warranty claims against (height x width x depth) - Page 56 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.bsh-group.com *9001582241* 9001582241 (0011)