Start Program; Lock - Siemens WN34A100NL Manual

Start program

touch the Start/Refill button on and
hold it for about 1-2 seconds, then release
the button. It
program starts and the appliance door
is locked.
The Ready in time is shown on the display
panel and counts down until the program
starts. After the program has started, the
program duration is displayed. And the
symbols for the progress of the program
are lit.
Child lock
You can lock the device to prevent
accidental changes to the settings you
have made. To do this, activate it
child lock.
To activate the child lock:
After the program starts, the buttons
( varioSpeed and B Ready in/
Drying time touch and hold for 3
seconds. Itw
symbol lights up on the
dis
play panel.
w lights up: the child lock is activated.
■
wflashes: when the programs and
■
program settings are set while the
child lock is activated.
Note: When the program ends, "Ÿš
displayed. The door is unlocked.w stays
on to remind you to deactivate the child

lock.

To deactivate the child lock: Touch the
buttons ( varioSpeed and
B Ready in/Dry time on and hold them
until the symbol w disappears.
Operation of the device
Add/Remove from
laundry
After starting the program (which only
performs washing), you can add or
remove laundry if necessary.
touch the Start/Refill button on. The
appliance checks whether laundry can be
refilled.
When the following appears on
the display panel:
The symbol O disappears, refilling is
■
possible.
The symbol O lights up, refilling
■
is not possible.
To resume the program you must press
the Start/Reload knob
touch. The program continues
automatically.
Clues
Do not leave the door open for too
■
long when adding laundry, otherwise
water from the laundry may leak out of
the appliance.
For safety reasons, the door remains
■
locked when the water level or
temperature is too high or
when the drum rotates and it is not
possible to add laundry at that time.
Changing the program
If you accidentally started the wrong
program, you can change the
program as follows:
1. touch the Start/Refill button on.
2. Choose another program.
3. And touch the Start/Refill knob
on again. The new program starts
from the beginning.
Note: When drying is activated, you can
change the program directly with the
program selector.
NL
41