Related Manuals for Siemens WN54A2U0IN
Summary of Contents for Siemens WN54A2U0IN
- Page 1 Washer dryer WN54A2U0IN siemens-home.bsh-group.com/welcome Register your product online...
- Page 2 Your new washer dryer Display rules : Warning! You have chosen a Siemens washer dryer. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. -
Page 4: Intended Use
Intended use Cleaning and maintenance . . . 40 Intended use Appliance housing/control panel . . . 40 Drum ......40 This appliance is intended for private ■... -
Page 5: Safety Instructions
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■... -
Page 6: Installation
Safety instructions The appliance must not be Warning ■ supplied through an external Risk of poisoning! switching device, such as a Detergents and care products timer, or connected to a may result in poisoning if circuit that is regularly consumed. switched on and off by a If accidentally swallowed, seek utility. - Page 7 Safety instructions The mains cable must not be Warning kinked, crushed or altered, and Risk of injury! must not come into contact with The appliance is very heavy. ■ any heat sources. Lifting it may result in injury. Do not lift the appliance on Warning your own.
-
Page 8: Operation
Safety instructions If the water hoses are altered Operation ■ or damaged, this may result Warning in material damage or Risk of explosions/fire! damage to the appliance. Laundry that has come into The water hoses must not be contact with solvents, oil, wax, kinked, crushed, altered or wax remover, paint, grease or severed. - Page 9 Safety instructions Certain objects may ignite Warning ■ when drying is in progress, Risk of poisoning! or even cause the appliance Poisonous fumes may be given to catch fire or explode. off by cleaning agents that Remove any lighters or contain solvents, e.g.
-
Page 10: Cleaning/Maintenance
Safety instructions If you pour the wrong Warning ■ quantity of detergent or Eye/skin irritation! cleaning agent into the Detergent and care products appliance, this may result in may spray out if the detergent material damage or damage drawer is opened while the to the appliance. - Page 11 Safety instructions Repairs and any other work Warning ■ on the appliance must only Risk of injury/material be conducted by our damage/damage to the customer service or by an appliance! electrician. The same applies The use of spare parts and for replacing the mains cable accessories supplied by other (when necessary).
-
Page 12: Environmental Protection
Do’s Please visit our website If the laundry is then dried in the ■ ■ http://www.siemens-home.com/in/ appliance, select the maximum Preserve.html to find out more possible spin speed. The less water details regarding ewaste disposal the laundry contains, the less time Consult the authorized service and energy are required for drying. -
Page 13: Positioning And Connecting
Positioning and connecting Mains lead Positioning and Bag: connecting Installation and operating ■ instructions S tandard accessories Customer Service location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the appliance for transport Note:... -
Page 14: Safety Instructions
Positioning and connecting Safety instructions Installation on a base or a wooden joist floor Warning Risk of injury! Caution! The appliance is very heavy. Damage to the appliance ■ Be careful when lifting/transporting The appliance may "wander" and tip/ the appliance. topple from the base when spinning. -
Page 15: Removing The Transport Locks
Positioning and connecting Removing the transport locks Unscrew and remove all four transport brace screws. Caution! Damage to the appliance The appliance is secured for ■ transportation using transport locks. If the transport locks are not removed, the appliance may become damaged when it is operated. -
Page 16: Removing The Support Struts
Positioning and connecting Lock the covers firmly in place by Remove the transport strut. applying pressure to the snap-in hooks. Hose and cable lengths Removing the support struts Connection on left side Unscrew and remove all screws in the vertical transport struts. ( ~ 140 cm Remove the transport struts. -
Page 17: Water Inlet
Positioning and connecting If the supply hose is too short for Note: Connection your connection, you can order an Connect the water supply hose to extension from the after-sales service. the water tap (¾" = 26.4 mm) and to the appliance: Water inlet –... -
Page 18: Water Outlet
Positioning and connecting Open the water tap carefully, Connection checking the leak tightness of the Drainage into a siphon connection points. The screw ■ The connection point must be connection is under mains water secured using a hose clamp with a pressure. -
Page 19: Alignment
Positioning and connecting Alignment Electrical connection Level the appliance using a spirit level. Warning Incorrect levelling may result in intense Danger of death! noise, vibrations and "wandering". There is a risk of electric shock if you touch live components. Loosen the lock nuts using a Never touch or hold the mains plug ■... -
Page 20: Before Washing For The First Time
Positioning and connecting Before washing for the first Grounding Instructions time Warning Danger of death! The appliance was inspected Improper connection of the ground may thoroughly before leaving the factory. To result in electric shock. Have the remove any residual test water, run the appliance checked by a qualified k Drum Clean programme the first technician or licensed electrician if you... -
Page 21: Transportation
Positioning and connecting Transportation Insert all four sleeves. e.g. when moving home Preparatory work: Turn off the water tap. Reduce the water pressure in the supply hose. ~ Page 43 Drain any residual water. ~ Page 42 Disconnect the appliance from the mains. - Page 22 Positioning and connecting Before switching on the appliance again: Notes The support struts must be ■ removed. ~ "Removing the support struts" on page 16 The transport braces must be ■ removed. ~ "Removing the transport locks" on page 15 Pour approx.
-
Page 23: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance A ppliance G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer Control panel Loading door Service flap... -
Page 24: Control Panel
Getting to know the appliance Control panel Programme default settings can be changed. Overview of all programme default settings ~ Page 33 Additional programme settings can be selected. Overview of all additional programme settings ~ Page 34 I Start/Reload button for starting, interrupting, (e.g. -
Page 25: Display Panel
Getting to know the appliance Display panel Additional programme settings Programme default settings Display Setting Ô Wash + Dry Ô/x/Ô ˜ x Display Setting Description ã Select Ì/â/î/ó Ž - 90° Temp. Temperature that +1/+2/+3 l Extra Rinse can be set in °C s Prewash Ž... -
Page 26: Laundry
Laundry Sorting laundry Laundry Sort your laundry according to the care P reparing laundry for washing instructions and manufacturer's L a u n d r y information on the care labels, depending on: Protecting your laundry and appliance Type of fabric/fibre ■... -
Page 27: Preparing Laundry For Drying
Laundry Preparing laundry for drying Starching To ensure an even drying result, Laundry should not be treated Note: Note: sort the laundry according to the: with fabric softener. Type of fabric ■ Switch on the appliance. Care symbols which are indicated on ■... -
Page 28: Detergent
Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial to ensure correct detergent selection, temperature Saving Soiling/note... -
Page 29: Overview Of Programmes
Overview of programmes Overview of programmes S electable programme O v e r v i e w o f p r o g r a m m e s Programme/Type of laundry Options/Information Max. load for washing/ Name of the programme Max. - Page 30 Overview of programmes Programme/Type of laundry Options/Information h Wool Í 2,0 kg/1,0 kg Hand- or appliance-washable fabrics that are made of wool or Ž - 40 °C contain wool; 2 - 800 rpm particularly gentle wash programme to prevent laundry from Ô...
- Page 31 Overview of programmes Programme/Type of laundry Options/Information ÞDown Wear 2,0 kg/2,0 kg Appliance-washable fabrics stuffed with down, such as pillows Ž - 60 °C and duvets; also suitable for items stuffed with synthetic fibres. 400 - 1000 rpm Notes l Extra Rinse, Ô Wash + Dry It is recommended that you pull down the coat zipper ■...
-
Page 32: Drying Table
Overview of programmes Programme/Type of laundry Options/Information G myTime 2,0 kg/6,0 kg Mixed fabrics; for lightly soiled laundry made of cotton and syn- Ž - 40 °C thetics. 400 - 1000 rpm The length of the programme can be set each time. The maxi- l Extra Rinse, Ô... -
Page 33: Programme Default Settings
Programme default settings B Finish in/Time Dry Programme default Before starting the programme, you settings can preselect the programme end ("Finish in" time) in 0.5h (h = hour) Y ou can change the default settings for increments (between “minimum P r o g r a m m e d e f a u l t s e t t i n g s selected programmes. -
Page 34: Additional Programme
Additional programme settings The individual washing mode: when ■ Additional programme select a programme (e.g.% Wash & Dry 60 min) that defaulted washing settings and drying phases combined, touch Ô Wash + Dry till only the symbol x You can find possible additional N ote: appeared in display. -
Page 35: Extra Rinse
Operating the appliance l Extra Rinse Operating the Settings that can be selected: appliance + 1 rinse cycle P reparing the appliance + 2 rinse cycles O p e r a t i n g t h e a p p l i a n c e + 3 rinse cycles The appliance was tested before delivery. -
Page 36: Select Programme/Switch On The Appliance
Operating the appliance Select programme/switch on Notes Unfold and load presorted items the appliance ■ of laundry. Mix large and small items. Washing items of different If you have activated the Note: size distribute themselves better childproof lock, you must first deactivate during the spin cycle. -
Page 37: Starting The Programme
Operating the appliance Starting the programme Filling the dispensers Pull out the detergent drawer. Touch and hold I Start/Reload button for 1~2 seconds, then release Warning the button. The programme starts and Eye / skin irritation! the appliance door is locked. If the detergent drawer is opened while the appliance is running, The finish-in time is shown in the display... -
Page 38: Adding/Removing Laundry
Operating the appliance Adding/removing laundry Cancel the programme After starting the programme (only for For programmes washing at high washing), you can add or remove temperatures: laundry if necessary. Touch the I Start/Reload button. To cool down laundry: Select Rinse Touch the I Start/Reload button. -
Page 39: Removing Laundry/Switching Off The Appliance
Appliance settings Removing laundry/switching Appliance settings off the appliance Y ou can change the following settings: Set programme selector to Û (Off). A p p l i a n c e s e t t i n g s The volume of the end signal. Open the door and remove the ■... -
Page 40: Sensors
Sensors 4: Switching the drum care Caution! ■ information signal on/off. The appliance may be damaged! Cleaning agents that contain solvents, Ž e.g. cleaning solvent, can damage Œ off surfaces and components in the appliance. Exiting setting mode Do not use cleaning agents that contain You can now end the process and set solvents. -
Page 41: Descaling
Cleaning and maintenance Descaling Clean the detergent dispenser tray and insert with water and a brush, Descaling should not be necessary if and dry it. Clean the inside of the the detergent is measured out correctly. housing as well. However, if it is required, follow the manufacturer's instructions for the descaling agent. -
Page 42: Drain Pump Is Blocked
Cleaning and maintenance Drain pump is blocked Carefully unscrew the pump cover; residual water may leak out. Clean the interior, pump cover Turn the water tap off to prevent Note: thread and pump housing. The more water from flowing in and to impeller in the drain pump must be ensure that it is drained via the pump. -
Page 43: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance The drain hose at the siphon Clean the filters: is blocked Disconnect the hose from the rear of the appliance. Turn the programme selector to Û (Off). Pull out the mains plug. Loosen the hose clamp. Carefully remove the drain hose;... -
Page 44: Faults And What To Do About Them
Faults and what to do about them Caution! Faults and what to do Water damage! about them Any escaping water may cause water damage. E mergency release Do not open the door if water can be F a u l t s a n d w h a t t o d o a b o u t t h e m seen through the glass. - Page 45 Faults and what to do about them Display Cause/Remedy Flashes (no water supply): Water tap turned on? Filter in the water supply is ■ blocked? ~ "Filter in the water supply is blocked" on page 43 Is the supply hose kinked or trapped? Lights up (low water pressure): For information only.
-
Page 46: Faults And What To Do About Them
Faults and what to do about them Faults and what to do about them Faults Cause/Remedy Water is leaking from the Attach the drain hose correctly or replace it. ■ appliance. Tighten the screw fitting on the supply hose. ■ The door cannot be - - - (Rinse hold = no final drain) is activated (depending on the module). - Page 47 Faults and what to do about them Faults Cause/Remedy The water is not draining. Drain pipe or water drain hose is blocked. Clean the drain pipe and the ■ water drain hose. Drain pipe or water drain hose is caught or jammed. Ensure that the drain ■...
- Page 48 Faults and what to do about them Faults Cause/Remedy The spin cycle runs sev- Not a fault – the unbalanced load detection system is adjusting an imbalance. eral times. The programme is taking Not a fault – the unbalanced load detection system is adjusting an imbal- ■...
-
Page 49: After-Sales Service
After-sales service Faults Cause/Remedy Creasing. Creasing occurs when you have exceeded the maximum load or selected ■ the wrong program for the type of fabric. All the required information can be found in the programme overview table. Remove clothes immediately after drying; creasing may occur if they are ■... -
Page 50: Consumption Values
Consumption values Consumption values E nergy and water consumption, programme duration and residual moisture for C o n s u m p t i o n v a l u e s the main washing programmes (approximate values) Programme Load Energy consump- Water consump- Programme... -
Page 51: Technical Data
Technical data Technical data Aqua-Stop warranty D imensions: O nly for appliances with Aqua-Stop T e c h n i c a l d a t a A q u a - S t o p w a r r a n t y 848 mm x 598 mm x 590 mm In addition to warranty claims against (height x width x depth) - Page 52 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.bsh-group.com *9001462265* 9001462265 (0010)
Need help?
Do you have a question about the WN54A2U0IN and is the answer not in the manual?
Questions and answers