Cleaning And Maintenance; Appliance Exterior/Control; Panel; Drum - Siemens WN34A100EU Manual

2
Cleaning and
maintenance
Warning
Cleaning and maintenance:
Danger of fatal injuries!
There is a risk of electric shock when
touching live components. Turn the
program selector to(From).
Remove the plug from the socket.
Attention!
Danger of fire and explosion!
Toxic fumes can be produced by cleaning
agents containing solvents, eg cleaning
solvent.
Do not use cleaning agents that contain
solvents.
Attention!
The device may be damaged!
Cleaning agents containing solvents, eg
cleaning solvent, can damage surfaces
and components in the device.
Do not use cleaning agents that contain
solvents.
Appliance exterior/
Be
control panel
Immediately remove detergent and
■
cleaning residues.
Wipe the housing and control panel
■
with a soft, damp cloth.
Do not use abrasive cloths, scouring
■
pads or
cleaning agents (stainless steel
cleaner). Do not clean with a water jet.
■

Cleaning and maintenance

Drum

:
Warning
Risk of injury/material damage and
damage to the device!
Permanent washing at low temperatures
and lack of ventilation of the appliance can
damage the drum and cause injuries.
Run a drum cleaning program regularly
or wash at a temperature of at least 60°C.
Leave the appliance to dry with the door
and detergent drawer open after each use.
Use chlorine-free cleaning agents, do not
use steel wool.
In case of odors forming in the appliance,
or to clean the drum, turn the Cotton 90°C
program without laundry.

descaling

Descaling should not be necessary if the
amount of detergent is dosed correctly.
However, if necessary, follow the
instructions of the manufacturer of the
descaling agent. Suitable descalers are
available via our website or via the service
department.
NL
45