Breakdown Of Parts - Wayne-Dalton TORQUEMASTER PLUS Installation Instructions And Owner's Manual

NOTE: The illustrations shown on this page are general representations of the door parts. Each specific door models may have unique variations.
I6.
I5.
A2.
I3.
F1.
A1.
C1.
B1.
H5.
A. FLAG ANGLES (AS REQUIRED):
A1. Quick Install (Q.I.) Flag Angles
A2. Fully Adjustable (F.A.) Flag Angles
B. JAMB BRACKETS (AS REQUIRED):
B1. Quick Install (Q.I.) Jamb Brackets
C. TRACK ROLLERS (AS REQUIRED):
C1. Short Stem Track Rollers
D. GRADUATED END HINGES:
D1. Single Graduated End Hinges (S.E.H.), Anti-Pinch
E. STACKED SECTIONS:
E1. Top Section
E2. Intermediate(s) Section
E3. Second Section
E4. Bottom Section
F. TOP FIXTURES:
F1. Top Fixture Bases - (L - Shaped)
F2. Top Fixture Slides - (L - Shaped)
G. DRAWBAR OPERATOR BRACKET (FOR TROLLEY OPERATED DOORS):
G1. Drawbar Operator Bracket

BREAKDOWN OF PARTS

I1.
G1.
F2.
H3.
D1.
I5.
I4.
I2.
A1.
F2.
F1.
E1.
J2.
E2.
B1.
E3.
H6.
E4.
A1. (Quick Install
Feature)
H1.
H. TRACKS:
H1. Left Hand Horizontal Track
H2. Right Hand Horizontal Track
H3. Left Hand Horizontal Track Angle
H4. Right Hand Horizontal Track Angle
H5. Left Hand Vertical Track
H6. Right Hand Vertical Track
I. TORQUEMASTER PLUS® SPRING ASSEMBLY:
I1. Center Bracket Bushing Assembly
I2. Spring Tube Assembly (Single Or Double Springs)
I3. Left Hand End Bracket (Double Springs Only)
I4. Right Hand End Bracket
I5. Left Hand And Right Hand Cable Drum Assemblies
I6. Idler bracket (Single Spring Only)
J. STRUT(S) (AS REQUIRED):
J1. Strut (U - shaped)
J2. Strut (asymmetrical)
K. HORIZONTAL TRACK ANGLES
K1. Left Hand Horizontal Track Angle
K2. Right Hand Horizontal Track Angle
5
H4.
H2.
A2.
J1.
B1. (Quick Install
Feature)
A2. (Fully Adjustable
Feature)