Breakdown Of Parts - Wayne-Dalton 8000 Installation Instructions And Owner's Manual

NOTE: The illustrations shown on this page are general
representations of the door parts. Each specific door
models may have unique variations.
J1.
J5.
J3.
J2.
A2.
A1.
C1.
F1.
D2.
D1.
C2.
B2.
C1.
B1.
I5.
I3.
L1.
I7.
A. FLAG ANGLES (AS REQUIRED):
A1. Quick Install (Q.I.) Flag Angles
A2. Fully Adjustable (F.A.) Flag Angles
B. JAMB BRACKETS (AS REQUIRED):
B1. Quick Install (Q.I.) Jamb Brackets
B2. Fully Adjustable (F.A.) Jamb Brackets
C. TRACK ROLLERS (AS REQUIRED):
C1. Short Stem Track Rollers
C2. Long Stem Track Rollers
D. GRADUATED END HINGES:
D1. Single Graduated End Hinges (S.E.H.), Industry Standard
D2. Double Graduated End Hinges (D.E.H.), Industry Standard
E. STACKED SECTIONS:
E1. Top Section
E2. Intermediate(s) Section
E3. Lock Section
E4. Bottom Section
F. TOP FIXTURE ASSEMBLIES (AS REQUIRED):
F1. Top Fixtures
G. STRUT(S) (AS REQUIRED):
G1. Strut (U - shaped)
H. DRAWBAR OPERATOR BRACKET (FOR TROLLEY OPERATED DOORS):
H1. Drawbar Operator Bracket (Supplied By Others)
TRACKS (AS REQUIRED):

BREAKDOWN OF PARTS

J2.
J6.
J1.
J7.
J8.
J9.
E1.
H1.
E2.
E3.
E4.
K1.
J4.
A2.
C1.
F1.
A1.
B1.
G1.
Top of vertical
track
B2.
3rd hole
set
I4.
I8. 2nd
hole set
I6.
L1.
I1.
1st hole
set
I1. Left Hand Horizontal Track Assembly
I2. Right Hand Horizontal Track Assembly
I3. Left Hand Vertical Track
I4. Right Hand Vertical Track
I5. Left Hand Riveted Vertical Track Assembly
I6. Right Hand Riveted Vertical Track Assembly
I7. Left Hand Angle Mount Vertical Track Assembly
I8. Right Hand Angle Mount Vertical Track Assembly
J. TORSION SPRING ASSEMBLY (AS REQUIRED):
J1. Left Hand and Right Hand Torsion Springs (As Required)
J2. Counterbalance Lift Cables
J3. Left Hand End Bearing Bracket
J4. Right Hand End Bearing Bracket
J5. Left Hand Cable Drum
J6. Right Hand Cable Drum
J7. Center Bracket
J8. Center Bracket Bushing
J9. Torsion Shaft
K. REAR BACK HANGS:
K1. Left Hand and Right Hand Rear Back Hang Assemblies
L. BOTTOM CORNER BRACKETS (AS REQUIRED):
L1. Left Hand And Right Hand Bottom Corner Brackets
6
I2.
K1.
Top of vertical
track
B2. (Fully
Adjustable
Feature)
3rd
B1. (Quick
hole set
Install
Feature)
2nd
hole set
Top
hole
Middle
hole
1st
Lower hole
hole set of hole/
Bottom
slot pattern
hole