Technical Data; Measuring Process - BARTEC BENKE DPA-4.5 Operating Manual

3 Technical data

3.1 Measuring process

Specification
Device type
Variant „Low Pressure" DPA-4.5 LowP
Measured variable
Measuring process
Measuring range
Method
SAM (Standard
Analysis Mode)
ASTM D 86
Similar to
DIN EN ISO 3405
IP 123
Repeatability Meets the requirements of the standards
Reproducibility Meets the requirements of the standards
Cycle times (gasoline/diesel) information for T4
SAM (Standard
Analysis Mode)
IBP (min)
50% point (min)
FBP (min)
December 2013
Distillation Process Analyzer DPA-4.5
Technical data
DPA-4.5
Measuring at reduced pressure
Distillation performance (distillate
quantity according to the temperature)
Batch distillation at atmospheric pressure
20 ... 420 °C (resolution 0.1 °C)
at 0 ... 100% condensed sample in the
receiver
RAM (Rapid
Analysis Mode)
Correlates with
RAM (Rapid
Analysis Mode)
24/29
36/41
Approx. 40% less
45/50
Depending on
product
than SAM
47