Technical Data; Evaluation Unit F 5673 - BARTEC BENKE HYGROPHIL F 5673 Operating Manual

1.4
1.4.1
Evaluation unit
Display ranges
(not the measuring range)
Auxiliary variables
Measurement channels
Measuring rate
Inputs per measurement channel
Analog outputs per measurement
channel
Interfaces
Display
Keyboard
Auxiliary energy
Ambient conditions
Dimensions (WxHxD)
Approvals
Weight
HYGROPHIL® F 5673 Operating manual, Software version 1.8.x, 387896MDHEN(14.06.2013)

Technical data

Evaluation unit F 5673

Measurement variable
Vol% [%]
PPM [ppm]
DT [°C,°F,K]
FP [°C,°F,K]
3
MC [mg/m ],
[lb/MMscF]
VP [hPa]
TT [°C,°F,K]
SP [bar,PSI,..]
WL [nm]
The temperature (TT) at the measuring point is measured via a sensor inte-
grated in the humidity sensor or entered by hand. The pressure (SP) is
measured via a 4...20 mA signal from an external pressure transmitter or
entered by hand. CO
signal or entered by hand.
1, 2 or 3
Max. 3 measurements / minute per channel
- Light waveguide port for optical humidity sensor
- 9-pole D-SUB plug for data memory with sensor characteristic
- Clamp-type terminal for PT 100 measurement sensor in sensor head
- Clamp-type terminal for signal from a pressure transmitter for absolute
pressure (4...20 mA)
- Clamp-type terminal for CO
all inputs Ex ia, galvanically isolated
Clamp-type terminal 0/4...20 mA, EEx ia, galvanically isolated
Source and sink
Resolution 0.0003 mA
Max. load: 500 Ω
Accuracy: 0.03 mA
Temperature drift: <0.001 mA/ °C
RS 232, modbus, profibus
Graphic display 320 x 240 dots
Red backlit touch-screen
DC 10...36 V max. 60 W (Si 6.3 A T)
AC 100...240 V max. 110 VA (Si 3.15 A MT)
Permissible working temperature: 0...+50 °C
Permissible storage temperature: -20...+60 C
Climatic category: IWI according to DIN 40040
483 x 192 x 212
ATEX, CSA, GOST
approx. 8.5 kg
Lower range limit
0
0
-100
-100
0
0
-50
0
780
-content (0...100%) is measured via a 4...20 mA-
2
content (4...20 mA)
2
System description
1-11
Upper range limit
100
25000
100
100
30000
250
100
250
830