Viewing Platform Information - ZOLL AutoPulse 100 User Manual

3.7

Viewing Platform Information

On initial power-up, pressing the Menu/Mode Switch button allows you to:
1. Enter Communication mode (refer to Section 3.8.1, step 3 on page 3-20)
2. View last patient session information
3. View Platform information
4. View Battery information
Items 2-4 above may also be accessed from the Administrative Menu (refer to section Section 2.3,
"Administrative Menu: User Pre-set Options," on page 2-10).
Once the Menu or Administrative Menu is active use the Move Up and Down arrow buttons to highlight
the desired menu item and the Select Choice Button to select it.
Information presented about the Last Patient session is:
1. Total compressions
2. Total active time (min:sec)
3. Total pause time (min:sec)
The last patient session data is updated after the Platform is power cycled and one complete compression
occurs.
Information presented about the Platform is:
1. Model number
2. Serial number
3. Software version
4. Name of manufacturer
5. Manufacturer location (city, state, country)
Information presented about the Battery is:
1. Battery serial number
2. Number of charge cycles performed
Page 3-18
User Guide