Figure 2-17 Continuous Mode Ventilation Tone Menu - ZOLL AutoPulse 100 User Manual

User Guide
Figure 2-17 Continuous Mode Ventilation Tone Menu
The "Set Cont Vent Tone" menu item allows you to select how many ventilation tones sound when in
Continuous Compression Mode. Selecting "1 Beep" (the factory pre-set) will allow for a single
ventilation tone to sound in order to cue rescuers to ventilate the patient. Selecting "3 Beeps" will allow
for three ventilation tones to sound as a countdown to cue the rescuer to ventilate the patient after the
third ventilation tone. Highlight the desired setting using the Move Up and Down arrow buttons, press
the Select Choice Button to select it (a check will appear beside the selected item- see Figure 2-17), and
then press the gray Menu/Mode switch button under the word "back" to return to the main
Administrative Menu.
CONTINUOUS
C O N T V E N T T O N E
1 Beep 1 Beep
3 Beeps
b a c k
Page 2-15