Adjusting The Color Intensity; Traditional, Garmin Clearvü, And Sidevü Sonar Setup - Garmin GPSMAP 10X2 Series Owner's Manual

Adjusting the Color Intensity

You can adjust the intensity of colors and highlight areas of interest on the sonar screen by adjusting the color
gain for traditional transducers or the contrast for Garmin ClearVü and SideVü/ClearVü transducers. This
setting works best after you have adjusted the level of detail shown on the screen using the gain or brightness
settings.
If you want to highlight smaller fish targets or create a higher intensity display of a target, you can increase the
color gain or contrast setting. This causes a loss in the differentiation of the high intensity returns at the
bottom. If you want to reduce the intensity of the return, you can reduce the color gain or contrast.
1 From a sonar view, select MENU.
2 Select an option:
• While in the Garmin ClearVü or SideVü sonar view, select Contrast.
• While in a Panoptix LiveVü sonar view, select Color Gain.
• While in another sonar view, select Sonar Setup > Appearance > Color Gain.
3 Select an option:
• To increase or decrease the color intensity manually, select Up or Down.
• To use the default setting, select Default.
Traditional, Garmin ClearVü, and SideVü Sonar Setup
NOTE: Not all options and settings apply to all models and transducers.
NOTE: These settings do not apply to Panoptix transducers.
From a sonar view, select MENU > Sonar Setup.
Scroll Speed: Sets the rate at which the sonar scrolls from right to left
In shallow water, you can select a slower scroll speed to extend the length of time the information is
displayed on screen. In deeper water, you can select a faster scroll speed. Automatic scroll speed adjusts
the scrolling speed to the speed the boat is traveling.
Noise Reject: Reduces the interference and the amount of clutter shown on the sonar screen
Rejection Settings, page
Appearance: Configures the appearance of the sonar screen
Alarms: Sets sonar alarms
Advanced: Configures various sonar display and data source settings
applicable to Garmin ClearVü or SideVü sonar views.
Installation: Configures the transducer
page 76).
Sonar Fishfinder
73).
(Sonar Alarms, page 75).
(Traditional, Garmin ClearVü, and SideVü Transducer Installation Settings,
(Setting the Scroll Speed, page
(Sonar Appearance Settings, page
(Advanced Sonar Settings, page
72).
(Sonar Noise
74).
75). Not
71