Customizing The Data Overlays; Resetting The Station Layouts; Assigning A Shortcut Key - Garmin GPSMAP 10X2 Series Owner's Manual

Customizing the Data Overlays

You can customize the data in the data overlays shown on a screen.
1 Select an option based on the type of screen you are viewing:
• From a full screen view, select MENU > Edit Overlays.
• From a combination screen, select MENU > Edit Combo > Edit Overlays.
• From a SmartMode screen, select MENU > Edit Layout.
TIP: To quickly change the data shown in an overlay box, hold the overlay box.
2 Select an item to customize the data and data bar:
• To change the data shown in an overlay box, select the overlay box, select the new data to show, and
select BACK.
• To select the location and layout of the data overlay bar, select Edit Layout, and select an option.
• To customize the information shown when navigating, select Navigation, and select an option.
• To turn on other data bars, like the media controls, select Top Bar or Bottom Bar, and select the
necessary options.
3 Select Done.

Resetting the Station Layouts

You can restore the layouts in this station to the factory default settings.
Select Settings > System > Station Information > Reset Layouts.

Assigning a Shortcut Key

You can quickly open commonly used screens by assigning a shortcut key. You can create a shortcut to
screens such as sonar screens and charts.
1 Open a screen.
2 Hold a shortcut key, and select OK.
TIP: The shortcut is also saved to the Favorites category with the shortcut key number.
10 Customizing the Chartplotter