Table of Contents
Advertisement
46/56
Maintenance and repair
Please note:
• Perform the work at the
upper end position of the
lift rotate unit.
• The rotating cylinder
must be depressurized
(vented). The rotary
table must be rotated for
disassembly/assembly.
Lubricate the damper
load adapter.
Bosch Rexroth AG, MIT: HD 2/H, 3 842 358 796/2015-01
10.3 Maintenance
Failure of the lift rotate unit by non compliance with the maintenance cycles
The load adapter damper must be lubricated every 2000 hours or every 500 000
cycles (whichever is reached fi rst).
There is a risk of damage to property, and the service life may be reduced if the
maintenance intervals are not complied with.
Klüber
Struktovis
GHD 0,5 g
Fig. 27:
Lubricate the load adapter damper
NOTICE
358 732-22
Advertisement
Table of Contents
