Needle Threader - Husqvarna VIKING Amber Air S 600 User Manual

Needle Threader

To make threading the needles easier, use the needle threader
A
included with the accessories.
Turn the handwheel so the needles are in their highest
B
position and lower the presser foot. Make sure one of the
rectangular markings of the needle threader is pointing
upwards (A). Place the thread from right to left in the notch
on the tip of the needle threader (B).
Hold the needle threader against the needle. Move the needle
threader down to the needle eye and press gently against the
needle, causing a small metal pin to push the thread through
the needle eye and form a thread loop (C).
Use the needle threader to pull the thread loop out behind
the needle (D).
C
D
4 Threading 31