3 Product Description
3.1 SPH TL BL-UP series inverter
SPH
Marks of
Mark
3.2 Label Explanation
Label contains the following information: for example SPH 6000TL BL-UP shows as below:
Danger to life due to high voltage in SPH
There is residual voltage in SPH, SPH requires 5 minutes to
discharge.
Please wait 5 minutes before you open the upper lid or the DC
lid.
Protective conductor terminal
Direct Current(DC)
Alternating Current(AC)
The machine complies with the requirements of the applicable
CE guidelines
Refer to the operating instructions.
Description
Push-button
Status symbol of SPH
Explanation
Operation of display screen and set system
Green light on
Red light on
Green light blinking
Red light blinking
SPH run normally
Fault state
1.Alarm state
2.Software
updating