Timing Mechanism Components - Toro Lynx SmartHub Installation And User Manual

Timing Mechanism Components

1. Left and Right Arrows allow you to
select the next entry field within the
same menu line. Any changes will be saved after
you exit that entry field.
Up and Down Arrows allow you to
2.
scroll up and down through the menu items.
3. Operation Mode LED Display will indicate the
current gateway operation mode.
4. LCD Panel is the display screen.
Input Dial allows you to scroll through
5.
the value selection within the selected entry field.
6. Home button allows you to exit from any
function menu and return the gateway to normal operation. After pressing the Home Key, all modifications to the
settings will be saved.
7. Manual Watering button allows you to activate station(s), syringe, or program(s) manually. See page 31.
8. Scheduled Watering button allows you to create an irrigation program as well as view the Station Based Flow
(SBF) list, which is the automatic watering schedule. See page 30.
Diagnostics button allows you to view the gateway's firmware version as well as other diagnostic information.
9.
See page 33.
10. Station Settings button allows you to modify station parameters. Within this setting, you can disable the station
from any activity, hold station watering for a specific number of days, set the station type to a switch, review how long
a particular station has run during the day, and add stations. See page 29.
11. Percent Adjust allows you to adjust run times at either the satellite, program, or station level. See page 28.
12. Start button will execute selected manual operation. See page 26.
13. Pause will cancel a currently running station. See page 26.
14. Stop button will cancel currently running program(s) or station(s). See page 26.
15. Satellite Settings button allows the user to modify the SmartHub parameters. Users can specify the gateway
communication mode, hold duration for gateway's activity, the language, clock settings, date, day change, CSG address,
gateway address, station delay, maximum number of stations to run simultaneously, units and display contrast. Within
this menu, the user can also reset all programs, reset the station parameters and reset all disabled stations.
See page 27.
Lynx® SmartHub Installation and User Guide
2
1
6 7
11
12
4
8 9
14
13
3
5
10
15
25