Start Button; Pause Button; Stop Button - Toro Lynx SmartHub Installation And User Manual

If the SmartHub has an active running program, the display will read:
Sun 04/02/06
GW# 001-001
Running 04 prg+ Man
P01 Sta01
%00:05:00
P01 Sta02
00:05:00
P01 Sta03D
00:05:00
P02 Sta10P
00:05:00
Man Sta21
00:10:00
Man Sta22S
00:10:00

Start Button

Use the Start button to execute either an irrigation program, a Multi-Manual operation, or a Syringe.
These are explained fully in the Manual Watering section, page 31.
Manual : M-Manual
Sat01 001-012 00:05
Simult : 003
Press to start
Press the Stop button to cancel.

Pause Button

The Pause button can be used to pause any running irrigation program or all irrigation activity.

Stop Button

Use the Stop function to cancel all irrigation (pictured), an active program, an individual station, a manual operation,
or even a switch. If the Lynx SmartHub has no current activity, pressing the Stop button will have no effect. The Stop
function causes a system cancel including power-down / power-up sequence for BOTH daughterboards regardless of
station activity.
02:31pm
Sec: 57
(The "%" symbol before the runtime indicates that station 01 is percent adjusted.)
(P01 indicates Program 01 is currently active)
(The "D" symbol after the station number indicates that station 03 is disabled.)
(The "P" symbol after the station number indicates that program 02 is paused.)
("Man" indicates Manual Watering is currently active)
(The "S" symbol after the station number indicates that program 02 is stacked.)
Manual : Start Prog
Program: 01
Press
Pause :
for : 00 hr 05 min
Press
00 Programs paused
Cancel : All Watering
Press
Running 01 programs
P01 Swh01 00:01:00
Lynx® SmartHub Installation and User Guide
(Running Multi-Manual)
to start
Prg: 01
to start
to Cancel
Manual : Syringe
Runtime: 01 min
Program: 01
Press to start
27