Smarthub Settings - Toro Lynx SmartHub Installation And User Manual

Lynx® SmartHub Installation and User Guide

SmartHub Settings

Satellite Settings allows you to set SmartHub parameters such as Time, Date and Language.
• Use the Up or Down Arrows
• Use the Left and Right Arrow
• Use the Input Dial
Command Function
Comm Mode: Use this menu item to select the SmartHub mode of operation between Central, Local or Off mode.
Hold All: This command suspends satellite operation. Select the suspension duration from Today, 02-30 days,
Permanent or None. This does not affect manual starts from the front panel.
Hold Rain: This command suspends satellite operation. Select the suspension duration from Today, 02-30
days, Permanent or None. When activated, Hold Rain will cancel any current watering, along with
suspending operation. This does not affect manual starts from the front panel, nor does it affect
stations defined as switches.
Reset Prg's: This command resets all programs by selecting Yes All. After selecting Yes All, press the Up or Down
Arrows
which the command can be cancelled.
All program settings will be erased after a successful reset.
Reset Sta's:
This command resets all station settings by selecting Yes. After selecting Yes, press the Up or Down
Arrows
which the command can be cancelled.
All station settings will be erased after a successful reset.
Reset Unit: This command resets the SmartHub settings by selecting Yes. Select Yes using the Input Dial
the command can be cancelled before the SmartHub reboots.
!
Power Mode: This setting shows the power mode as "Switched" or "Continuous". We recommend "Switched".
LSM System: This setting sets the type of decoders attached to the SmartHub controller. Options: Yes or No.
Send OFFs:
This setting will send an extra OFF command when a station or irrigation program is stopped or ends.
Options: Yes or No. We recommend No.
Enable Sta's: This setting resets all disabled stations with one execution. Select Yes All using the Input Dial
stations can be enabled/disabled by using the Disable function within the Station Settings menu.
Language: Default language is English. Options are English, Spanish, French, and Italian.
28
to navigate through the menus.
to advance to the next entry field on the same menu line.
to select values when editing.
to activate. There is a short countdown before the command executes during
to activate. There is a short countdown before the command executes during
and press the Up or Down Arrows
Resetting the unit will erase all user-defined program data and configuration values in the
SmartHub's memory.
and press the Up or Down Arrows
Reset All Programss
to defaults
05
STOP to escape
Reset All Stations
to defaults
05
STOP to escape
to activate.There is countdown during which
Reset All Defaults
10
STOP to escape
to activate. Select No to cancel. Individual