Layout 2 - Wired Lynx; Layout 3 - Wireless - Toro Lynx SmartHub Installation And User Manual

Lynx® SmartHub Installation and User Guide

Layout 2 - Wired Lynx

The Field Interface Unit is attached to the SmartHub which is out in the field. Due to this distance (see note below), a
Surge Protection Unit (SPU) is necessary on both ends of the cable run.
Wired Lynx
-
+
LYNX
1
The Wireline connection is limited to about 9 miles.

Layout 3 - Wireless

The Lynx SmartHub DEC-RS-1000-DR (digital radio and modem) communicates with the Lynx computer via radio. The
system is preconfigured at our production facility.
Wireless
- +
LYNX
20
FIU
SPU
2
FIU
Set CD jumper for
method of communication.
• MODEM: jumper on left two pins.
• RADIO: jumper on right two pins.
SPU
wireline
wireline to pedestal bypasses SPU
RF
SmartHub 2
SmartHub 1
GDC-200
– +
HOME WATERING MANUAL SCHEDULED WATERING DIAGNOSTICS SETTINGS STATION
%ADJUST START PAUSE/ STOP SYSTEM
RESUME SETTINGS
3
1 ON 2 3 4 1 ON 2 4 3
SmartHub 1
2 1 ON 4 3 1 ON 3 2 4
GDC-200
– +
HOME MANUAL WATERING SCHEDULED WATERING DIAGNOSTICS SETTINGS STATION
%ADJUST START RESUME PAUSE/ STOP SETTINGS SYSTEM
SmartHub 2
ON 4 3 1 2 ON 1 2 3 4
SmartHub 3
Radio