Table of Contents
Advertisement
Names and Functions of Parts (Cont.)
Control Panel
DRYING INSIDE Switch
DRYING INSIDE Lamp
Inverter Indicator
AIR PURIFIER Switch
AIR PURIFIER Lamp
z The dehumidifier remembers the operation mode. Even if the power plug is disconnected or the power is turned off, the
unit restarts at the previous setting.
z In the case of a power outage during operation, the dehumidifier will restart operation upon restoration in the operation
mode before the power outage.
Inverter Indicator
Indicates the operation level of the
selected operation mode.
Power-saving
operation
z This indicator does not light during AIR
PURIFIER operation and DRYING INSIDE
operation, when the water tank becomes
full, and when an error occurs.
8
P18
LCD Display
ON/OFF TIMER
Switch
P17
P15
SWING LOUVRE
Switch
P16
High-power
operation
FULL Lamp
Lights when the tank is full of water.
HUMIDITY
LAUNDRY
SELECTION
Switch
Switch
P12
MODE Switch
LCD Display
˜ All of the indicators on the LCD display are
shown for explanation purposes.
˜ When any switch is pressed, the LCD backlight
will turn on for approximately 10 seconds.
Child Lock Indicator
Timer
Swing
Display
Monitor
P17
Humidity Indicator
z Indicates the approximate humidity.
z Insert the power plug into the power socket to display the
current humidity.
z CURRENT ...Current humidity is displayed.
The humidity is displayed in a range from 30 to 80%
• When the humidity is less than 30%: "30%" is displayed.
• When the humidity is more than 80%: "80%" is displayed.
z SELECTION ...Humidity Setting is displayed.
(Only in ECO AUTO mode)
P19
P10
POWER Switch
POWER Lamp
P12
P15
Operation Mode
Indicator
P16
P10–14
Advertisement
Table of Contents
