Table of Contents
Advertisement
Draining
When the tank is full (approximately 5.5 L), the unit automatically stops and the FULL lamp lights.
Please empty the tank.
When the water tank becomes full, the FULL lamp lights.
1
Remove the water tank.
Place your hand on the
handle and carefully pull the
water tank out straight to
prevent water from spilling.
2
Open the tank lid, and pour out
the water.
Tank lid
Tank
guard
Floating element
Do not remove or
dismantle.
z FULL lamp lights.
(There will be continuous sounds "bleep bleep bleep".)
z Airflow stops.
(Louvre stops.)
z LCD indicators go out.
Hold the water tank.
Pour the
water out
from here.
z After pouring out the water, replace the water tank,
and the FULL lamp will go out. The unit restarts.
z When the FULL lamp is on, other operations
are forbidden except for pressing the POWER
switch.
z In OFF TIMER operation, the FULL lamp is ON
as indicator.
3
Close the tank lid.
4
Check the tank, and firmly push it
all the way in.
Tank
Make sure the tank is
not broken or cracked.
Confirm that the tank lid and the tank guard are
securely attached, and push the tank in.
(Sounds "Blip".)
z If the tank is not installed correctly, the FULL lamp will
come on, and the unit will not operate.
z Secure the tank lid and tank guard properly or else
the tank may become stuck.
z Do not remove or dismantle the floating element from
the tank. If it is removed, the unit cannot detect the
water level, and this could result in leakage.
19
Advertisement
Table of Contents
