Tools Required
• 7/16" Wrench
• 10 mm Wrench
• 17 mm Wrench
• 24 mm Wrench
• 7 mm Allen wrench
• 8 mm Allen wrench
• Torque wrench
• 10 mm Socket wrench
• 10 mm Ratchet wrench
• Crescent wrench
• Phillips screwdriver
• Rubber mallet
Assembly Procedure
Two people will be required for this procedure.
TIP: Read and understand all instructions thoroughly before assembling this unit. Check all items carefully. If there is
damage, see the Customer Service section of this manual for proper procedure to return, replace, or reorder parts.
Assemble Frame Components
1. Install screws, washers, and locknuts securing the stability bracket and the bottom cross brace to the tower frame
using an 8mm Allen wrench and 17mm wrench.
Item
1
2
3
4
5
6
7
Nut, M10 x 1.5, Hex Nylock
8
Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).
Page 12 of 40
Description
Bottom Cross Brace
Tower Frame
Stability Bracket
Screw, M10 x 1.5, 110mm
Screw, M10 x 1.5, 120mm
Washer, Flat 3/8"
Hole Plug, ½"
Qty.
1
1
1
1
1
4
2
2